10-20-2010 09:05 AM
Hello everyone,
I created a sparse zone in a SPARC M5000 server running solaris 10 update 8, the server's global zone manages LUNS from an EMC ClariiON CX-300 through Veritas Volume Manager/ File System 5.0 MP1.
I created a volume on the global zone with a vxfs file system (mkfs).
I succesfully direct mounted the vxfs file system on the sparse zone by mounting it to its zone path from the global zone. Since this zone is actually another server, I am required to have its file systems to mount at boot, but when I try to add entries in the sparse zone /etc/vfstab I get the error
mount: Operation not applicable to FSType vxfs
This is the entry on the sparse zone vfstab table:
/dev/vx/dsk/dgtst2/tst2 /dev/vx/rdsk/dgtst2/tst2 /tst vxfs 0 yes suid
These are related entries added to the sparse zone through zonecfg:
device
match: /dev/vx/rdsk/dgtst2/tst2
device
match: /dev/vx/rdsk/dgtst2/tsttap2
device
match: /dev/vx/rdsk/dgtst2/tstarc2
device
match: /dev/vx/rdsk/dgtst2/tstnew2
Are there any known issues that cause this, I am also planning to run veritas snapshots of those file systems for backup purposes thought netbackup. Can anyone with zones experience and veritas volumes/file systems help?
Thanks.
Solved! Go to Solution.
10-20-2010 09:18 AM
The Zones section of the documents is here:
https://sort.symantec.com/public/documents/sf/5.1/solaris/html/sfha_virtualization/ch02.htm
10-20-2010 09:18 AM
The Zones section of the documents is here:
https://sort.symantec.com/public/documents/sf/5.1/solaris/html/sfha_virtualization/ch02.htm