cancel
Showing results for 
Search instead for 
Did you mean: 

SFHA group offline and cannot get mounted

JoanK
Not applicable

on linux rhel 5.5, using Storage Foundation and HA.  having problems with a disk group.  cannot get enabled on primary server.  how do i enable either using command line or using the gui?

3 REPLIES 3

joseph_dangelo
Level 6
Employee Accredited

Joan,

Would you mind elaborating a little further on the issue that you are experiencing?  Are you unable to import a Disk Group or are you having issues bringing a Disk Group resource online in VCS?

Thanks,

Joe D

Gaurav_S
Moderator
Moderator
   VIP    Certified

You mean to say the diskgroup is getting disabled ?

If its a "dgdisabled" situation, you need to deport & reimport the diskgroup ... Please note diskgroup usually gets disabled because of issues on underlying disks or storage ....

If you can paste some outputs, it would be best to advise for us ..

-- vxdisk list

-- vxdisk -o alldgs list

any error messages if you have seen ?

technote which you would like to read...

http://www.symantec.com/docs/TECH7407

 

Gaurav

Zahid_Haseeb
Moderator
Moderator
Partner    VIP    Accredited

What I think that your DG resource can enable on secondary server but not able to enable on primary server ?

if this is correct then check/verify that you haver a proper connection of SAN disk/drives with the primary server