05-05-2015 07:32 AM
Hello,
Solved! Go to Solution.
05-05-2015 12:05 PM
Your volume is an 8-way stripe (STRIPE 8/512) so you will need 8 LUNs to increase the size of the volume.
If you don't have 8 LUNs, then you will need to with do a "vxassist relayout" which just needs a relatively small tmp space to relayout, but takes a while to relayout and effects peformance of volume or you can mirror to a new LUN as concat and then remove old mirror, but this requires you temporarlly assign double the storage, but has less impact on performance - see https://www-secure.symantec.com/connect/forums/how-expand-dg-vgbackup-and-after-filesystem-prod01p
Mike
05-05-2015 07:52 AM
Hello,
What is the structure of the volume ? can you paste the output of vxprint ?
It is quite possible that striped volume is getting spread across multiple disks & the available space is all available from one or multiple disk however not enough to equally cut the stripes to grow the volume ..
so if the volume has 3 stripes, you should have spaces available in 3 different disks in order for resize to succeed ...
Alternatively, you can try below technote
https://support.symantec.com/en_US/article.TECH136828.html
G
05-05-2015 08:25 AM
Arup,
'vxassist -g xxx maxsize' will list free blocks in the disk group (without regard to volume geometry).
Instead, use 'vxassist -g xxx maxgrow <volume_name>' to list the amount that a specific volume can grow, taking into account the volume's geometry (concat vs stripe vs mirror).
You should do a 'vxprint -ht' before and after to see how the disks are mapped to the stripes. It should be a unique disk for each stripe in the volume.
Ken W
05-05-2015 11:33 AM
Hello Gaurav
Please refere the below output--
sunstation1:/root# vxprint -htqg DG-DB001 VOL-DB001-data1
v VOL-DB001-data1 - ENABLED ACTIVE 1414115885 SELECT VOL-DB001-data1-01 fsgen
pl VOL-DB001-data1-01 VOL-DB001-data1 ENABLED ACTIVE 1414164480 STRIPE 8/512 RW
sd DSK-DG-DB001-110d-01 VOL-DB001-data1-01 DSK-DG-DB001-110d 3328 170826240 0/0 xp24k1_110d ENA
sd DSK-DG-DB001-1369-02 VOL-DB001-data1-01 DSK-DG-DB001-1369 2107648 3317760 0/170826240 xp24k1_1369 ENA
sd DSK-DG-DB001-1369-04 VOL-DB001-data1-01 DSK-DG-DB001-1369 110288128 2626560 0/174144000 xp24k1_1369 ENA
sd DSK-DG-DB001-110f-01 VOL-DB001-data1-01 DSK-DG-DB001-110f 3328 170826240 1/0 xp24k1_110f ENA
sd DSK-DG-DB001-136B-02 VOL-DB001-data1-01 DSK-DG-DB001-136B 20969728 5944320 1/170826240 xp24k1_136b ENA
sd DSK-DG-DB001-1100-01 VOL-DB001-data1-01 DSK-DG-DB001-1100 3328 170826240 2/0 xp24k1_1100 ENA
sd DSK-DG-DB001-1112-03 VOL-DB001-data1-01 DSK-DG-DB001-1112 21292288 5944320 2/170826240 xp24k1_1112 ENA
sd DSK-DG-DB001-1101-01 VOL-DB001-data1-01 DSK-DG-DB001-1101 3328 170826240 3/0 xp24k1_1101 ENA
sd DSK-DG-DB001-110e-02 VOL-DB001-data1-01 DSK-DG-DB001-110e 49024768 5944320 3/170826240 xp24k1_110e ENA
sd DSK-DG-DB001-1102-01 VOL-DB001-data1-01 DSK-DG-DB001-1102 3328 170826240 4/0 xp24k1_1102 ENA
sd DSK-DG-DB001-110c-02 VOL-DB001-data1-01 DSK-DG-DB001-110c 83891968 5944320 4/170826240 xp24k1_110c ENA
sd DSK-DG-DB001-1103-01 VOL-DB001-data1-01 DSK-DG-DB001-1103 3328 170826240 5/0 xp24k1_1103 ENA
sd DSK-DG-DB001-1368-02 VOL-DB001-data1-01 DSK-DG-DB001-1368 135232768 5944320 5/170826240 xp24k1_1368 ENA
sd DSK-DG-DB001-1104-01 VOL-DB001-data1-01 DSK-DG-DB001-1104 3328 170826240 6/0 xp24k1_1104 ENA
sd DSK-DG-DB001-110b-02 VOL-DB001-data1-01 DSK-DG-DB001-110b 164723968 5944320 6/170826240 xp24k1_110b ENA
sd DSK-DG-DB001-1105-01 VOL-DB001-data1-01 DSK-DG-DB001-1105 3328 170826240 7/0 xp24k1_1105 ENA
sd DSK-DG-DB001-1111-03 VOL-DB001-data1-01 DSK-DG-DB001-1111 165430528 5399040 7/170826240 xp24k1_1111 ENA
sd DSK-DG-DB001-1640-01 VOL-DB001-data1-01 DSK-DG-DB001-1640 3328 545280 7/176225280 xp24k1_1640 ENA
05-05-2015 11:37 AM
Hello Haniwa
Thank you for your reply. Yes the volumes are stipe one.Out put is already posted in reply to Gaurav.
05-05-2015 12:05 PM
Your volume is an 8-way stripe (STRIPE 8/512) so you will need 8 LUNs to increase the size of the volume.
If you don't have 8 LUNs, then you will need to with do a "vxassist relayout" which just needs a relatively small tmp space to relayout, but takes a while to relayout and effects peformance of volume or you can mirror to a new LUN as concat and then remove old mirror, but this requires you temporarlly assign double the storage, but has less impact on performance - see https://www-secure.symantec.com/connect/forums/how-expand-dg-vgbackup-and-after-filesystem-prod01p
Mike
05-06-2015 01:34 AM
Hi,
You should try:
vxassist -g DG-DB001 maxsize layout=stripe ncol=8
same layout as your current volume.
05-06-2015 02:16 AM
As others have mentioned, the error is most likely due to the fact that the grow operation is requiring free space from 8 devices as the volume is of a striped layout.
cheers
tony
05-06-2015 05:46 AM
Thank you all,all of you pointining to the correct root cause.The same has been communicated to the end customer also.Kudos to all!!!!