cancel
Showing results for 
Search instead for 
Did you mean: 

VXVM gives trouble in solaris11.2

Hi,

    I have installed VXVM6.0.1 SF with trial version on Solaris11.2 in VMWare workstation. While installing the installer asked to set lwp_default and stksize to 0x8000. I have done it and completed installation successfully without any issue. After reboot also no issue. But if i give df -h command then immediately system going to kernel panic and starts rebooting and while booting it throws warning in lwp_default and stksize. 

   Also i can see logs to run the vxkeyless set none. This also done.   Need any work around to fix this issue.

 

Regards,

 vinothtv

1 Solution

Accepted Solutions
Accepted Solution!

I believe you should be

I believe you should be atleast on SF ver 6.0.5 for sol 11.2 to be supported.

see 'Supported platform version':@

https://sort.symantec.com/checklist/install/exporting/print/VCS/Solaris%2011/x86-64/6.0.1

View solution in original post

1 Reply
Accepted Solution!

I believe you should be

I believe you should be atleast on SF ver 6.0.5 for sol 11.2 to be supported.

see 'Supported platform version':@

https://sort.symantec.com/checklist/install/exporting/print/VCS/Solaris%2011/x86-64/6.0.1

View solution in original post