Showing results for 
Search instead for 
Did you mean: 
Storage Foundation

Discussion Posts

Error started in Rhel 6.4 with installing VXFS

Hello this is kinda a duplicate of However its not working again.    While installing SFHA when we reach VXFS we get this     Preparing packages for installation... VRTSvx...

Kim_Borup by Not applicable
  • 3 replies
  • 0 kudos

Resolved! HP 3PAR StorServ 7000/10000 and VxDMP 3.5 / 4

I was wondering if anyone has experience using HP 3PAR StorServ 7000 / 10000 (V Class) with VxDMP 3.5, or 4.  It seems that these arrays are supported out of the box with 5 and 6.  In previous versions, the libvx3par ASL is available or embedded, but...

DMP / VCS configuration looks ok, but OS shows errors

Goodday,   I have a VCS running, as far as I can tell, everything looks ok. It is a 2 node cluster directly (no switch) connected to a SUN/LSI/ 6180 diskarray. The connections look ok. DMP shows no errors but in the messages file on the OS it is cons...

Resolved! Upgradation from sfha/dr 5.0 MP3RP3 to sfha 6.0.3

Existing Environment Two nodes cluster at primary site and one node cluster at dr site (GCO) OS on all nodes = rhel 5.3 sfha/dr version = 5.0 mp3rp3 Agenda Plan to upgdate the sfha/dr version from 5.0 mp3rp3 to sfha/dr 6.0.3 Question 1.) Can we upgra...

Zahid_Haseeb by Moderator
Partner    VIP    Accredited
  • 4 replies
  • 0 kudos

Resolved! lun over 2TB got error status from vxdisk list

Hi,   I have tried to bring up this lun for 2 days, and got nearly no progress, sometimes the lun can be online, but if I try to use vxdisksetup to setup it, it would become error again, I am really despairing, I hope someone can help me to solve thi...

Resolved! Volumes in status of vxrecover after every restart

Hi all,   I'm need of an advice if anyone can help: I have a few environments of SUN Solaris servers connected to SUN Storage in a clustered environment. The version is Storage Foundation HA 5.1 SP1. The environment contains three volumes, each one i...

yairz by Level 4
Partner Accredited
  • 5 replies
  • 0 kudos

Resolved! Patch Veritas sfha-sol_sparc-5.0MP3RP5 for Linux

Hello,   i have been assigned to a task to upgrade Veritas in a bunch of servers solaris, the patch is sfha-sol_sparc-5.0MP3RP5. I will need to do the same job on Linux machines, do you know which is the corrispondent patch for Linux?   Thank you    ...

Resolved! why VCS retry online 2 minutes later

  Hello all   I use SF 6.0.1 on Suse 11. I have a IP resource managed by VCS, in some situation, the IP resource can't be brought online at first time, so I set OnlineRetryLimit of IP to 3, hope VCS may be brought online via retry.   I executed my te...

Resolved! Shrinking large filesystem spanned across multiple luns

Hello, we have a mirrored/raid1 volume of 1TB spanned across two arrays (80 luns from each array) and its usage is now 400G (at some point usage was 850G). We need to shrink the filesystem to 500G so that we can utilize the space for new filesystem. ...

KNR by Level 3
  • 1 replies
  • 1 kudos

Resolved! CVM/CFS on Solaris

Dear All, I would like to create a VCS cluster of 2 nodes that will have the CFS mounted on both of them. Once the CFS is mounted into the cluster I want to get it shared to the system that is not part of VCS cluster. My question is it possible if no...

Resolved! data conversion activity SVM to VERITAS

Hi, I want perform SVM to VERITAS data conversion activity. means we have /dev/md/dsk/d30 as /oracle FS that same FS we have converted to VXVM as /dev/vx/dsk/oradg/oracle (encapsulation) without losing any single KB. can u tell me what are the stpes...

Tiger09 by Level 4
  • 2 replies
  • 0 kudos

Resolved! 5-to-1 cluster setup - Symantec licensing required

Hi, I am currently working on a cluster solution which is based on 5-to-1 configuration in which we have one single standby server to protect the five servers. In this setup, when one of the five servers fails, its applications are moved to the stand...

KiMau by Level 2
Partner Accredited
  • 3 replies
  • 1 kudos

Resolved! Howto enable DRL on a mirrored volume through VOM

Hi, I have installed the Storage Foundation Basic Edition ver. 6  and the Veritas Operation Manager v.5 on a RHEL 6.3 64bit demo server. Then, I have created a volume and a mirror on than volume without DRL using the VOM interface. I would lik...

Resolved! elevator=deadline

 29937    0 -rw-r--r--   1 root     root         4096 Mar  7 16:27 ./devices/virtual/block/VxVM3000/queue/scheduler  30024    0 -rw-r--r--   1 root     root         4096 Mar  7 16:27 ./devices/virtual/block/VxVM4000/queue/scheduler  30128    0 -rw-...

charl by Level 2
  • 2 replies
  • 0 kudos

Resolved! How to break VRTSvxvm root mirror for patching

I found some information on this site, just want to cover my bases before doing it on our production system:     prtconf -vp|grep bootpath root@discus2 # prtconf -vp|grep bootpath bootpath: '/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@...

Resolved! Campus cluster: disks bad tagged

Hello, ¿is it possible to change a disk tag without stopping the vxvm? Lets say we have a 2 node cluster in 2 sites: Y and T. The dg has 8 disks and the tag of 2 of them are wrong: - disk 00 is tagged as T when should be Y - disk 01 is tagged as Y w...

joagmv by Level 4
  • 8 replies
  • 0 kudos

Resolved! We had the same "runonce" problem

We had the same problem as this post:  I also understand the technical procedure to disable/delete the service.   I also searched for th...

Resolved! How to run fbsync on windows ?

Environment OS = Windows 2008 R2 (64bit) SFHA = 6.0.1 One Diskgroup with one volume configured and that volume configured for replication. Replication is running fine and we tried migration between both nodes which is also running fine. Question - I ...

Zahid_Haseeb by Moderator
Partner    VIP    Accredited
  • 7 replies
  • 0 kudos