cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation

Discussion Posts

Expand LUN

I'm trying to expand a LUN size on my server. I've expanded it on storage (compellent) and linux can see the new size on "fdisk -l" but when I try to expand it on Veritas I receive the error message "Cannot remove last disk in disk group. Resizing th...

vxvm fss

hi,i like to clarify things.the difference between shared DG in CVM and shared DG with FSS is that in first case the disks in DG should be visible to all nodes that access DG and in second case with FSS the disks are not visible to all nodes(shared t...

vucni11 by Level 4
  • 1241 Views
  • 3 replies
  • 0 kudos

Resolved! dirty region

hi,it is highly recommended to have a DRL on mirror disks,on root mirrored disks?if i have an journaled file system on data slice like ext3,so on then dirty region is highly recommended or it is fine to have mirrored volumes without DRL?DRL like jour...

vucni11 by Level 4
  • 1390 Views
  • 1 replies
  • 0 kudos

encapsulation

hi,i wish to clarify to myself things.test6:~/Desktop # vxprint -g rootdgTY NAME         ASSOC        KSTATE   LENGTH   PLOFFS   STATE    TUTIL0  PUTIL0dg rootdg       rootdg       -        -        -        -        -       -dm rootdisk     sda     ...

vucni11 by Level 4
  • 777 Views
  • 1 replies
  • 0 kudos

Resolved! agent

hi,i understood that agents:-online and offline resources;based on resource configuration in main.cf the agent start the resource.-call clean function if resource is faulty.-monitor resources status-make sure that resources not start on other nodes w...

vucni11 by Level 4
  • 1255 Views
  • 1 replies
  • 0 kudos

Storage Migration Steps - on VVR

Hi ,I want to migrate storage on VVR. Below are the steps I have in mind. Please guide me to do it in right way.1. Stop the replication between DC1 & DR2. Add the New array lun on primary site node.3. Vxevac from Source lun to target lun. Same for SR...

vxrlink

hi,i have in primary site:test88:~/Desktop # vxprintDisk group: vvrTY NAME         ASSOC        KSTATE   LENGTH   PLOFFS   STATE    TUTIL0  PUTIL0dg vvr          vvr          -        -        -        -        -       -dm disk_2       disk_2       -...

vucni11 by Level 4
  • 1106 Views
  • 3 replies
  • 0 kudos

Resolved! vvr

hi,i like to change slave host to primary host in a vvr configuration.before to do it ishould stop the replication between primary and secondary.right?is this the command?vradmin -g vvr stoprep rvg_name hostafter the secondary is primary i start the ...

vucni11 by Level 4
  • 1701 Views
  • 4 replies
  • 0 kudos

Patch error

I have installed SFHA and I'm trying to apply patch Symantec Storage Foundation HA 6.2.1 Patch 300 (https://sort.veritas.com/patch/detail/12486) but I'm receiving error.I already have installed Veritas Storage Foundation High Availability 6.2 Mainten...

I moved my disk to new install linux os

*** Moved to new post from https://vox.veritas.com/t5/Storage-Foundation/VxVM-vxdg-ERROR-V-5-1-10978-Disk-group-nbu-dg-import-failed-No/m-p/770425  *** I am facing issue for my disk group. My OS got currupted so I move my disk to new install linux os...

Resolved! nfs_sg does not go to online state

Hi,I have two systems, Solaris and RHEL, when I configure ha on both systems, the RHEL responds OK, but solaris goes to "OFFLINE|FAULTED" state,I found the following suggestions, but to no avail:svcadm enable svc:/network/nfs/fedfs-client:defaultsvca...

dmaman by Level 2
  • 1929 Views
  • 4 replies
  • 0 kudos

Resolved! vxvm download

Hi,I like to install vxvm and i have can not.I found an repy of Marianne to a thread."VxVM is now called Infoscale Storage. Here is the landing page: https://www.veritas.com/product/software-defined-storage/infoscale-storageThere are quite a number o...

vucni11 by Level 4
  • 2573 Views
  • 1 replies
  • 0 kudos

clone disk group

Greetings,I need to migrate disk groups between hosts. The current aging server runs vxvm 5.x on solaris 10. The proposed work loads are to be taken on by a combination of Solaris 11 and Solaris 10 logocal domains, split between application and datab...

mbarlow by Level 3
  • 1850 Views
  • 3 replies
  • 0 kudos

Resolved! HP-UX data migration

Hello,I am trying to migrate data from one external hdd to another. The data from the "source" hdd data is from a HP-UX (vxfs i believe) device and Id like to copy the information to an ext4 filesystem on another hdd. I have a RHEL 7.2 box to do this...

Kohdy by Level 2
  • 1937 Views
  • 3 replies
  • 0 kudos

Resolved! SFHA Upgrade steps

Hi Guys, I'm currently running SFHA version 5.0  Netbackup 2 node cluster(VCS cluster). OS is Solaris SPARC. Now I want to upgrade this to 5.0 MP3 before I can upgrade it to higher versions (e.g 6.0/6.1)...Can somebody please help me with the steps t...

Bongz_83 by Level 3
Partner Accredited Certified
  • 1377 Views
  • 2 replies
  • 0 kudos

Resolved! Re: Installing VxVM

 I am unable to get VXVM software package. How can I download and Where can I get it.Could you please help to me. gopalrao939@gmail.com.its great help to me to learn nd practice for VXVM.Thanks&Regards,Gopal:+91-9884949084.

Issues configuring SAMBA using cfsshare

Hello all,I'm setting up a few Linux Veritas clusters that will provide HA storage to a java app, and present that data as an HA CIFS share.  The cluster is configured, the shared disks are working and stable, but I'm stumped on the Samba portion.I h...

database flashsnap

hi,I am running SFRAC 6.1 with AIX.I setup a snapshot with flashsnap technique on one of my DB volume.the validation of the database layout  and the deportation of the snapshiot luns are successful.However, while trying to mount those luns on the off...

kwakou by Level 4
  • 1218 Views
  • 3 replies
  • 0 kudos

CFS cluster data migration

Hi ,System running HP ux 11.31 & service guard CFS cluster.If I  migrate the disk using vxevac -g disgroup  command can this migrate all volume on dg including mirrored vol & cfsvol1_dcl   as  mentioned below.should i need to take any addition steps ...

billa07 by Level 2
  • 1312 Views
  • 3 replies
  • 0 kudos

not a valid vxfs file system - CDS to sliced

Can you plese help me to mount vxfs after disk replacemnt?server1:/# mount -F vxfs /dev/vx/dsk/appdg/scratch /scratch/ UX:vxfs mount: ERROR: V-3-20012: not a valid vxfs file system UX:vxfs mount: ERROR: V-3-24996: Unable to get disk layout version se...