cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation

Discussion Posts

Resolved! VxVM vxdisksetup ERROR V-5-2-3535 c1t2d0s2: Invalid dmpnodename for disk device c1t2d0.

 # vxdisk list | grep -i disk_1 Disk_1       auto:none       -            -            online invalid    # vxdisk -e list | grep -i disk_1 Disk_1       auto      -             -            online       c1t2d0s2  # prtvtoc /dev/rdsk/c1t2d0s2 * /d...

sandy321 by Level 4
Certified
  • 3196 Views
  • 5 replies
  • 0 kudos

Resolved! vxdisk list showing dgdisabled

heres the vxdisk list output  DEVICE       TYPE      DISK         GROUP        STATUS c0t0d0s2      sliced    disk1         rootdg         online c0t1d0s2    sliced     disk2         appdg        online dgdisabled   vxprint -ht not working for app...

splendor by Not applicable
  • 635 Views
  • 2 replies
  • 0 kudos

Resolved! vxdbd high cpu usage @ hpux

  There is evidence vxdbd daemon is consuming too much cpu and following its behaviour has many EPIPE errors on writes. See first column: $ grep " write" ./pid.12331  | awk '{print $4,$5, $7, $9, $16,$17}' | sort | uniq -c | sort -rn 45355 pid=12331 ...

alizarra by Not applicable
  • 1676 Views
  • 1 replies
  • 0 kudos

Resolved! Unable to Add New HDD into RAID 5 DG

Hi All,   There was one Disk failed in RAID 5 DG. Which was replaced , Current vxprint -htg raid 5 output shown as below.   bash-2.03# vxprint -htg raid5 dg raid5        default      default  73000    1019571721.1080.DEV-ADC dm raid501      -       ...

Resolved! SFRAC 3 Node GCO

Hi,   I'd like to find out if its possible to install a SFRAC GCO (VVR) with 2 Nodes in one site and only 1 Node in the DR site.   I'm thinking that Oracle RAC might have some issues with this?   O/S Linux RedHat 5 DB Oracle RAC 10G (dont know if its...

RiaanBadenhorst by Moderator
Partner    VIP    Accredited Certified
  • 288 Views
  • 3 replies
  • 0 kudos

Resolved! User not able to mount a VX disk in linux

In Rel 5.5 Linux I can give a user the ability to mount a file system as long as I have the correct entries in the fstab file. cat /etc/fstab file /dev/emcpowera1 /gfs1 ext3 rw,user,noauto 0 0    This one works but the next one does not. /dev/vx/dsk/...

Resolved! not able to move volume from one dg to other

i have 2 dgs rootdg and datadg as shown below root@SDPPAP01 # vxprint -htg datadg   dg datadg       default      default  71000    1288246437.26.SDPPAP01 dm mirrordisk   c0t1d0s2     auto     20351    143328960 - v  appsvol      -            DISABLE...

sandy321 by Level 4
Certified
  • 1961 Views
  • 11 replies
  • 0 kudos

Resolved! Where to donwload VRTSjre15 for Solaris 10 Sparc system?

I need to download VRTSjre and VRTSjre15 for Solaris 10 Sparc system. The VRTSWebApp agent is unable to online resource and gives message that VRTSjre15 is missing in the log file. I check and do not find it installed on my server. My system is runni...

Mnj by Not applicable
  • 870 Views
  • 4 replies
  • 0 kudos

Resolved! vxconfigd daemon is not starting

Hi I have just uninstall vxvm 3.5 and installed VxVM 5.0MP3 but during reboot i got given below error.   obpsym: symbolic debugging is available. Hardware watchdog enabled NOTICE: VxVM not started configuring IPv4 interfaces: ce0 ce1 ce2 ce3. Hos...

Resolved! recovering vx config after migrating storage on HW level

Hi Folks, We plan to migrate from EMC storage to HDS. The storage is used by RHEL servers with SF 4.1. Let's say we have 10 EMC LUNs set up in one disk group and volumes spanning multiple disks. We will replicate data of 4 EMC disks on the fabric lev...

bazi by Level 3
  • 539 Views
  • 3 replies
  • 1 kudos

Resolved! SF5.0 whit MP1 I don't see correctly the LUN

Hi, I have a problem with the SFHA for solaris10, the relase is 5.0 mp1.   The problem I have is as follows: I zonate LUN to the server correctly, but the Storage Foundation does not see all the LUN, but only one with many paths. I already run a "...

giacomopane by Level 4
Partner Accredited Certified
  • 422 Views
  • 3 replies
  • 0 kudos