cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation

Discussion Posts

Resolved! How to remove a Quick i/o file on solaris?

Hi All ,    we have a running solaris and veritas quick i/o files for oracle 9i database . The files no longer exist in the database but somehow exist in the file system . How do we remove the veritas files from the filesystem ?           lr...

nalini by Level 2
  • 981 Views
  • 2 replies
  • 0 kudos

Resolved! Calculate vxfs millisecond delay

We have a Netbackup master server cluster, the catalog/DB is sitting on a vxfs volume.  There is a case open currently with Veritas and they have found massive delays (40 seconds!) at backup peak time on the Sybase database and have recommended we d...

Chris_W by Level 4
Partner Accredited
  • 888 Views
  • 2 replies
  • 0 kudos

Resolved! Upgrade from 5.1 to 6.0.5 - problem with NIC resource

Hi, all. Just upgrade an S10 cluster running 5.1SP1 to 6.0.5. For the NIC resource, we have a red question mark, and in the logs:  NIC:nic:monitor:Cannot use IPv4 network host [IP deleted] for ping since Protocol is set to IPV4. Resource state: UNK...

Encapsulation issue on VxVM6.1

Hello, We are running  Solaris  X 86 and added to virtual disk and trying to mirror the  root disk, but getting this error message.     Continue with encapsulation? [y,n,q,?]  (default: y)   A new disk group rootdg will be created and the disk d...

mokkan by Level 6
Certified
  • 963 Views
  • 1 replies
  • 0 kudos

Resolved! grow fs ufs

Hi guru. I would like to grow a file system UFS managed by VxVM by 5GB # df -h /opt/sybase/data     Filesystem             size   used  avail capacity  Mounted on     /dev/vx/dsk/datadg/lv_nms_data                             89G    74G    14G  ...

tgenova by Level 4
  • 587 Views
  • 1 replies
  • 1 kudos

vxprint and volume size

Hello, I am trying to understand the  disk and volume size   using vxprint,  I can get the correct value by   LENGTH/2  in KByes, but I am wondering why do I need to devide by/2 ?    

mokkan by Level 6
Certified
  • 968 Views
  • 2 replies
  • 1 kudos

Resolved! Import disk group failure

Hello everyone!  When I finished disk group configuration, I cannot find disk group until I imported by manual,but after rebooting server,I couldn't find the disk group only if I imported again.following are my operations.Also the RVG was DISABLED un...

Resolved! Replacing a shared disk group for stroage migration

Can any one post the steps to replacing a disk that has shared dg group on CFS cluster on HP unix service guard with the below existing attributes. layout=mirror mirror=2 mirror=enclr enclr=emc0 enclr=emc1 logtype=dco dcoversion=20 ndcomirror=2 dr1=...

billa07 by Level 2
  • 1227 Views
  • 5 replies
  • 0 kudos

After vxvmconvert

Before running vxvmconvert, there is this pvscan PV /dev/sdb1   VG VG_DATA   lvm2 [150.00 GiB / 50.00 GiB free]   After running vxvmconvert the above is NOT reported by pvscan, as expected. This is reported: vxdisk list DEVICE       TYPE      ...

Resolved! Unable to mirror devices due to disk offset issues

Hi all,   I'm in the middle of a storage migration project. I'm moving volumes from one storage system to another with mirroring. The OS is Solaris 10 update 11 and Storage Foundation version is 6.1 (latest patch level).   While trying to mirro...

yairza7 by Level 2
Partner
  • 566 Views
  • 1 replies
  • 0 kudos

Resolved! SFCFSHA 6.2 : DG in unknown status

Hi all, On a 2 nodes system I did a fresh installation of SFCFSHA 6.2. There's an IBM array with shared Luns. There's only one path. Linux are 6.7 64bit built identically. After installation, llt failed to start. So I installed also the MR and pa...

DSI

Hello folks. I am running SFRAC 6.1 under AIX 6.1 Following few storage issues, i got disassociated plexes. while trying to reassociate them with their volumes using vxplex -g <mydg> att, i am hitting a panic on the server. the panic string is DS...

kwakou by Level 4
  • 670 Views
  • 3 replies
  • 0 kudos

Resolved! VRTS STORAGE FOUNDATION ENTERPRISE HA 5.0 SOL

Hi Everyone, Can anyone please help me in understanding how does this product work and how is it licensed? Any document/link/licensing guide for the same will be of great help. Correct me if i am wrong, this is now Infoscale? I dont want to get in ...

disk group import failure

I created a full snapshot volume some months ago from Server A to Server B. Both servers are running veritas cluster 6.1 under AIX Now when i want to refresh the snap vol with its original source; I stopped all cluster service on Server B and deport...

kwakou by Level 4
  • 560 Views
  • 4 replies
  • 0 kudos

VxFS Performance problem after HPUX/Veritas upgrade

An an old machine  - model "9000/800/rp4440  " (4 PA-RISC 8800 processors (1000 MHz, 64 MB)) with 16GB we have upgraded HPUX from 11.23 to 11.31 - Veritas from 3.5 to 4.1. Now, from time to time we have system with very high response time. Basically,...

motix by Level 2
  • 378 Views
  • 2 replies
  • 1 kudos

Resolved! Cross Cable in Storage Foundation

Hi,   I have 2 master servers that they are connected through cross cables (cluster). I would like to know what´s the reason for that (and I if can remove one of them).      

Resolved! VxVM Migrate Data and remove the disk

Hello Friends,   We have Veritas Volume Manger (4.1) configured in Solaris 10... We have a disk group:  where there are two local disks along with several SAN Disks... I am looking for a way to migrate the data/volumes in the local disk to SAN Disk...

Resolved! After upgrade cvmvoldg fails for all diskgroups

Hi, after upgrading my SFHA 6.1 cluster from Rhel6.5 to Rhel 6.7 and SFHA 6.1.0.200 to 6.1.1-300 , cvm is online, but cvmvoldg fails to startup for all diskgroups. (the installer ended with message ...successful....) Information in /var/log/messages...

AlexBP by Level 2
  • 528 Views
  • 1 replies
  • 0 kudos