05-16-2010 11:13 PM
Solved! Go to Solution.
05-20-2010 01:08 AM
Definitions:
1 Mbyte (megabyte) 2^20 bytes (1,048,576 bytes)
1 Gbyte (gigabyte) 2^30 bytes (1,073,741,824 bytes)
1 Tbyte (terabyte) 2^40 bytes (1,099,511,627,776 bytes)
In general if this document refers to a limitation of (for instance) 2 Gbyte, 2 Gbyte 1 byte (1,073,741,823 bytes) is meant.
To improve readability, this has been abbreviated to 2 Gbyte .
The symbol ~ is used to denote approximately
Maximum size of a single file and a filesystem.
This also applies to Solaris[TM] x86, but there may be some issues with disk drives larger than 30 Gbyte. This is due to hardware limitations with some PC motherboard/disk configurations.
OS Release |
Single file |
File system |
Solaris[TM] 2.5.1 |
2 Gbyte |
1 Tbyte |
Solaris[TM] 2.6 - 9 12/02 (U3) |
~1012 Gbyte |
1 Tbyte |
Solaris[TM] 9 08/03 (U4) - Solaris 10 FCS |
~1023 Gbyte |
16 Tbyte |
A single file in Solaris 2.6 through Solaris 9 (U3) is limited to approximately 1012 Gbyte because the file must fit inside the 1 Tbyte filesystem. The filesystem is nominally 1 Tbyte, but in fact, due to the overhead in such a large filesystem, the largest single file ends up being about 1012 Gbyte. (part of this is a bug, but even if bug-free, a single file can't be 1 Tbyte due to the filesystem overhead). The overhead in the filesystem includes amongst other things, items such as superblock backups and inode tables. The example given here is using 1024 Kbyte (1 Mbyte) for the number of bytes per inode (nbpi) within the UFS filesystem. If nbpi is set to a lower value, more filesystem space will be allocated to inode tables and less will be available to store data. With nbpi=8 Kbyte, the maximum single file size would be smaller than 1012 Gbyte. The file in this example cannot use any of the minfree area set up on the filesystem (which is setup for root only use). On a 1 Tbyte filesystem minfree is set to 1% which translates to about 10 Gbyte.
A safe assumption here would be that the limit on the size of a single file is the size of the filesystem,minus 1% to 2% overhead. In Solaris 2.6, the swap and tmpfs filesystems are still limited to 2 Gbyte. This is not the total amount of swap, it is a limit per swap slice or per swap file. A swap slice or file may be defined as larger than 2 Gbyte, but any space above 2 Gbyte in that slice or file will not be accessible and the size of the slice or file will be reported by the swap command as 2 Gbyte. There can be multiple swap slices or files totaling more than 2 Gbyte. Any later release of Solaris running 32 bit kernel has the same limitation. Later releases of Solaris running a 64 bit kernel do not have this limitation. See the USAGE paragraph in the Solaris 8 swap(1M) manual page for the new limits.
Solaris 9 Update 4 introduced multiterabyte UFS. The maximum individual file size is still the same as before (~1 Tbyte ), as increasing it would require radical on-disk format changes. The total filesystem size can now be up to 16 Tbyte. The -T option is specified to the newfs command to create such a filesystem. See the newfs(1M) manpage for additional information. There is also a limit of 1 million files per Tbyte, for instance. A 4 Tbyte UFS filesystem would have a 4 million files limit). This is done to keep fsck times reasonable (even when logging is enabled).
Multiterabyte UFS functionality can also be added to earlier releases of Solaris 9 by installing the UFS patch 113454-09 or later. See the Special Install Instructions in the patch README for a list of additional patches required to get the full Multiterabyte functionality.
The maximum single file size in a multiterabyte filesystem, which is greater than 1 Tbyte is 1 Tbyte minus 500 Mbyte or 1023.5 Gbyte As a rule of thumb this should be taken as 1023 Gbyte.
A multiterabyte UFS filesystem is not bootable (This means the root filesystem cannot be a multiterabyte filesystem).
A multiterabyte UFS filesystem is not mountable in any version of 32bit Solaris kernel.
Limitations in combination with the OBP.
Excluding the multiterabyte root filesystem limitation detailed above, the root filesystem has limits in Solaris[TM] 2.x that are not imposed on any other filesystems. This limiting factor is a combination of two things, the OS release and the OBP (Open Boot Prom) level.
To establish the OS release, examine the /etc/release file To establish the OBP level, use the command prtconf -V (capital V ).
Here is a list of the various possible configurations.
OBP level |
OS Release |
Max root filesystem size |
OBP 3.1beta1 or newer |
Solaris 2.5.1 Kernel Patch 103640-08 or newer |
No limit |
OBP 3.1beta1 or newer |
Solaris 2.6 |
No limit |
OBP 3.0 or earlier |
Solaris 2.5.1 Kernel Patch 103640-07 or older. |
2Gbyte |
OBP 3.0 or earlier |
Solaris 2.6 on an Ultra (sun4u) |
4Gbyte |
Solaris 10 and ZFS
ZFS is now fully integrated in Solaris 10 U2 and above.
Limitations of Solaris 7 Operating System
Solaris 8 Operating System
Solaris 10 Operating System
Hope this helps
Gaurav
05-17-2010 01:51 AM
05-17-2010 07:36 AM
05-18-2010 09:11 AM
05-20-2010 01:08 AM
Definitions:
1 Mbyte (megabyte) 2^20 bytes (1,048,576 bytes)
1 Gbyte (gigabyte) 2^30 bytes (1,073,741,824 bytes)
1 Tbyte (terabyte) 2^40 bytes (1,099,511,627,776 bytes)
In general if this document refers to a limitation of (for instance) 2 Gbyte, 2 Gbyte 1 byte (1,073,741,823 bytes) is meant.
To improve readability, this has been abbreviated to 2 Gbyte .
The symbol ~ is used to denote approximately
Maximum size of a single file and a filesystem.
This also applies to Solaris[TM] x86, but there may be some issues with disk drives larger than 30 Gbyte. This is due to hardware limitations with some PC motherboard/disk configurations.
OS Release |
Single file |
File system |
Solaris[TM] 2.5.1 |
2 Gbyte |
1 Tbyte |
Solaris[TM] 2.6 - 9 12/02 (U3) |
~1012 Gbyte |
1 Tbyte |
Solaris[TM] 9 08/03 (U4) - Solaris 10 FCS |
~1023 Gbyte |
16 Tbyte |
A single file in Solaris 2.6 through Solaris 9 (U3) is limited to approximately 1012 Gbyte because the file must fit inside the 1 Tbyte filesystem. The filesystem is nominally 1 Tbyte, but in fact, due to the overhead in such a large filesystem, the largest single file ends up being about 1012 Gbyte. (part of this is a bug, but even if bug-free, a single file can't be 1 Tbyte due to the filesystem overhead). The overhead in the filesystem includes amongst other things, items such as superblock backups and inode tables. The example given here is using 1024 Kbyte (1 Mbyte) for the number of bytes per inode (nbpi) within the UFS filesystem. If nbpi is set to a lower value, more filesystem space will be allocated to inode tables and less will be available to store data. With nbpi=8 Kbyte, the maximum single file size would be smaller than 1012 Gbyte. The file in this example cannot use any of the minfree area set up on the filesystem (which is setup for root only use). On a 1 Tbyte filesystem minfree is set to 1% which translates to about 10 Gbyte.
A safe assumption here would be that the limit on the size of a single file is the size of the filesystem,minus 1% to 2% overhead. In Solaris 2.6, the swap and tmpfs filesystems are still limited to 2 Gbyte. This is not the total amount of swap, it is a limit per swap slice or per swap file. A swap slice or file may be defined as larger than 2 Gbyte, but any space above 2 Gbyte in that slice or file will not be accessible and the size of the slice or file will be reported by the swap command as 2 Gbyte. There can be multiple swap slices or files totaling more than 2 Gbyte. Any later release of Solaris running 32 bit kernel has the same limitation. Later releases of Solaris running a 64 bit kernel do not have this limitation. See the USAGE paragraph in the Solaris 8 swap(1M) manual page for the new limits.
Solaris 9 Update 4 introduced multiterabyte UFS. The maximum individual file size is still the same as before (~1 Tbyte ), as increasing it would require radical on-disk format changes. The total filesystem size can now be up to 16 Tbyte. The -T option is specified to the newfs command to create such a filesystem. See the newfs(1M) manpage for additional information. There is also a limit of 1 million files per Tbyte, for instance. A 4 Tbyte UFS filesystem would have a 4 million files limit). This is done to keep fsck times reasonable (even when logging is enabled).
Multiterabyte UFS functionality can also be added to earlier releases of Solaris 9 by installing the UFS patch 113454-09 or later. See the Special Install Instructions in the patch README for a list of additional patches required to get the full Multiterabyte functionality.
The maximum single file size in a multiterabyte filesystem, which is greater than 1 Tbyte is 1 Tbyte minus 500 Mbyte or 1023.5 Gbyte As a rule of thumb this should be taken as 1023 Gbyte.
A multiterabyte UFS filesystem is not bootable (This means the root filesystem cannot be a multiterabyte filesystem).
A multiterabyte UFS filesystem is not mountable in any version of 32bit Solaris kernel.
Limitations in combination with the OBP.
Excluding the multiterabyte root filesystem limitation detailed above, the root filesystem has limits in Solaris[TM] 2.x that are not imposed on any other filesystems. This limiting factor is a combination of two things, the OS release and the OBP (Open Boot Prom) level.
To establish the OS release, examine the /etc/release file To establish the OBP level, use the command prtconf -V (capital V ).
Here is a list of the various possible configurations.
OBP level |
OS Release |
Max root filesystem size |
OBP 3.1beta1 or newer |
Solaris 2.5.1 Kernel Patch 103640-08 or newer |
No limit |
OBP 3.1beta1 or newer |
Solaris 2.6 |
No limit |
OBP 3.0 or earlier |
Solaris 2.5.1 Kernel Patch 103640-07 or older. |
2Gbyte |
OBP 3.0 or earlier |
Solaris 2.6 on an Ultra (sun4u) |
4Gbyte |
Solaris 10 and ZFS
ZFS is now fully integrated in Solaris 10 U2 and above.
Limitations of Solaris 7 Operating System
Solaris 8 Operating System
Solaris 10 Operating System
Hope this helps
Gaurav
05-22-2010 07:22 AM
This Solaris release provides support for multiterabyte UFS file systems on systems that run a 64-bit Solaris kernel.
Previously, UFS file systems were limited to approximately 1 terabyte on both 64-bit and 32-bit systems. All UFS file system commands and utilities have been updated to support multiterabyte UFS file systems.
You can use the fstyp -v command to identify whether a UFS file system has multiterabyte support by checking the following value in the magic column:A UFS file system with no multiterabyte support has the following fstyp output:
# /usr/sbin/fstyp -v /dev/md/rdsk/d3 | head -5 ufs magic decade format dynamic time Thu Jul 17 11:15:36 2008
# /usr/sbin/fstyp -v /dev/md/rdsk/d0 | head -5 ufs magic 11954 format dynamic time Thu Jul 17 12:43:29 MDT 2008