BIOS is not ACPI compatible

Hello all,

I've got a problem with the backup exec system recovery disc 2010.
When I try to boot with the CD (on USB CD Drive) or USB Key, I have this message :
 
Status: 0xc0000225
Info : Windows failed to load beacause the firmware (BIOS) is not ACPI compatible.
 
A kb on symantec website tells to change the option in the BIOS but I don't have any option about ACPI.
 
I found that the CD BESR is a Windows PE 2.5 (Vista). But the hardware which I try to restore isn't compatible with vista.
 
 
Is there any solution for this problem like a Windows PE XP ?
 
 
Thanks.
12 Replies

You could try to get a SRD

You could try to get a SRD that is not based von Vista e.g. from BESR 8.5 or 7. That's the only thing i can think of.

After several Internet

After several Internet searches, versions 7 and 8.5 are also based on Windows Vista.
I still download these versions but I get the same error.

Well then I think you're

Well then I think you're simply out of luck.

Any updates here ?

Any updates here ?

Hi. First I wanna say that

Hi. First I wanna say that I'm not good with my English by I try to explaine what i did to resolve this problem...

 

Certeinly, y enter bios configuration. Then, in Power options (In my case, Power Management Setup) there's a option Power Managment/APM that I had disable, I change it to ACPI and save that configuration.

 

Finaly it work!!! I could star norton ghost in my pc.

 

Hope this was usefull for you and sorry if I made any mistake while I write because I just speak Spanish.

Would you mark this post as

Would you mark this post as solved please ?

Would you please mark this

Would you please mark this post as solved ?

Would you please mark this

Would you please mark this post as solved ?

Would you please mark this

Would you please mark this post as solved ?

May I ask you to mark this

May I ask you to mark this post as solved ?

Re: BIOS is not ACPI compatible

restore to default setting of your bios then set your boot sequence then save

Tags (1)

Re: BIOS is not ACPI compatible

hi 

i have hp  laptop, windows vista,  few days ago i faced the same problem (bios is not ACPI compatible) i went through bios by pressing F10 long after switch on laptop, then chosed file then chosed default settings,( after this ,make sure that key function is enable,if not change from disable to anable,) then i pressed F10, then dos monitor appeared and i chosed "start up windows normally" then windows start. 

Tags (2)