07-18-2013 02:01 PM
Hi
I have WIndows server 2003 with SEPM installed runing on Hyper-v,i need to move the machine to an Esxi server and decided to backup and restore the server with SSR 2011.Which options should be selected during the restore.Single "C" partition exists on the server
Restore Anywhere - select
set active drive - select
restore original disk signature ??? The drive letter should remain the same and i will recover to a blank hard drive
Your computer's drive letters are atypical
You are restoring a data recovery point to a blank hard drive.
As best practice it is not recommend enabling the disk signature restore option when re-targeting an OS image to dissimilar hardware
restore master boot record - do not select
Solved! Go to Solution.
07-19-2013 12:25 AM
The Restore Original Disk Signature should not be selected for the System Drive. It is to be selected for the additional Data Drive if you have.
The OS will take care of the Drive Letter assignment after the restore.
Select the following options for the C:\ :
Restore Anyware should be selected as we are moving to a dissimilar hardware.
07-19-2013 12:25 AM
The Restore Original Disk Signature should not be selected for the System Drive. It is to be selected for the additional Data Drive if you have.
The OS will take care of the Drive Letter assignment after the restore.
Select the following options for the C:\ :
Restore Anyware should be selected as we are moving to a dissimilar hardware.
07-22-2013 12:26 AM
This may help : http://www.symantec.com/docs/TECH74089