cancel
Showing results for 
Search instead for 
Did you mean: 

SSR 2011 and Fusion io drives

NeilB
Level 4

Hello,

I have a server running Windows Server 2008 Enterprise SP1 with 2 Fusion io drives (www.fusionio.com), set up as dynamic disks and mirrored in Windows.

I had one inexplicable server reboot during an incremental backup this morning.  Now I have an incremental backup sitting at 94% for a very long time.

Is there an issue with this type of drive or with the dynamic type and/or mirroring?

Any suggestions appreciated.

2 REPLIES 2

Markus_Koestler
Moderator
Moderator
   VIP   

Afaik dynamic disks are supported, with some limitations.

Have a look here:

http://www.symantec.com/business/support/index?page=content&id=DOC3911 p. 26

http://www.symantec.com/business/support/index?page=content&id=TECH69331

 

Regarding the reboot: Make sure you have SP1 applied, this should fix the reboot in 99% of the cases.

Regarding the backup sitting at 94% have a look here:

https://www-secure.symantec.com/connect/forums/besr-2010-90237914-backup-hangs-95

https://www-secure.symantec.com/connect/forums/besr-2010-backups-stuck-94-after-sp2-2-different-servers#comment-5047201

Markus_Koestler
Moderator
Moderator
   VIP   

Have you resolved the issue ?