I have been stuck on this for a while now with now solution and this problem, so far, has occurred only on one machine. When attempting to recover, in the last few seconds of the recovery I receive an error message:
-Cannot copy data from the recovery point to the destination.
--The requested FRS entry is unused (free, 0).
I was not able to find much help on the web either. Any help would be much appreciated.
Symantec System Recovery 2011
System A has a recover point created on our central storage.
Hard drive of System A needs to be replaced
I have the hard drive connected to my system and properly partitioned and attempting to recover using the SSR console
note: I have successfully completed this exact same process a few times. This is the first failure.
Solved! Go to Solution.
Sorry for the long delay, just super busy around here. Anyway I did a CHKDSK /R /F on the source drive then created the image locally and transferred onto an external. I was able to succesfully recover the image onto a new hard drive, so thank you very much for your suggestion.
Above I mentioned that I stored the image locally. This is because for some reason, I was not able to store the image on to an external drive. It would fail every time and I'm not quite sure why. But that's something I can easily avoid in the future.