I have VSR configured on a Dell xeon with 32gb ram and a 10gb network. I can backup files to the location I am going to save my VSR images too. I get 1.0-1.3GB/s transfer rate without any issues...
VSR is only copying over at say 25-300Mbps which is roughly 35MB/s (google converter hah)..
I have 1tb t back up and dont want it to take forever when i can copy a gig a second via normal file transfer. Is something needed to be configured to get more speed from VSR? or is this the nature?
I know that we have had some issues in the past (https://www.veritas.com/support/en_US/article.100006699.html), so I am going to see if we can get the same for VSR 18.x
You mention that a file copy within Windows is fast but how much data did you copy? Does it start fast and get progressively slower testing things that way?
@criley - Saw those regkeys - yes i do search... hah...
tried following the keys and they dont exist, was hoping for just replace ssr with vsr but no go.. so i apprecaite anything your looking into. Also hopefully you can get it in before the beta program runs out. I will post over there my results if you can get anything going!
so yes, I can copy a 20gb file direct and it goes 1GB/s throughout. I will copy that file a few times and give a bigger go at it to see.
once again apprecaite your time.
ive done extensive testing on this for all 3 reg keys and has not done any performance gains for my setup. This reply is just letting you know that I have not seen any performance gain, and not a complain. I will share my notes later but just wanted to get this here...
Testing took time as I was really busy... and i couldnt get consistant results...
its really easy to see... each backup set is within a block set.
very top was to an aws vm appliance and no keys applied
2nd was an aws physical appliance and no keys applied - continued to use this storage for consistancy
you can see on far left, which key i used. Reg1, Reg2 and Reg3 pertains to the files after zip extracted in that order.
all in all, not sure if there was a benefit so i need to evaluate if i am going to use the keys but I do appreciate your time getting this setup.
I installed the key, rebooted and fired off a backup...