cancel
Showing results for 
Search instead for 
Did you mean: 
System Recovery

Discussion Posts

Useful Veritas System Recover 22 - Links

Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...

klauskresnik by Moderator
Employee Accredited Certified
  • 2430 Views
  • 3 replies
  • 5 kudos

'How To' videos for Veritas System Recovery (VSR)

How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...

criley by Moderator
Employee Accredited
  • 2918 Views
  • 2 replies
  • 6 kudos

Resolved! Bad Sectors?

On an SBS 2011 server running Symantec System Recovery 2013, I am seeing frequent errrors that read like the following:  Error E7C3000F: Device \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy260 cannot read 8192 sectors starting at LBA 1994432816.  Th...

JohnK by Level 3
Partner Accredited
  • 593 Views
  • 8 replies
  • 1 kudos

Resolved! Install new disks in Win2008R2 Server

I'm migrating to new hard drives in a Dell R720 server, with the PERC6i controller. I'm running SSR2013 11.0.2. Here is my plan, let me know if I'm missing anything: Take a final backup with SSR.Shut down server and swap drives.Start server, boot i...

Robvm by Level 2
  • 265 Views
  • 2 replies
  • 0 kudos

Restore UEFI based sever

Hi Forum I have a Windows 2008 R2 server with UEFI . The server has 2 partitions - one system EFI partition and one partition with OS. Im using SSR 2103 to make an image and tries to restore this to another server with UEFI. Restores with no error ...

the same GUID on two computers

I have two computers with the same GUID in Altiris Agent.  So I deleted them from SSR-MS, then reset Guid (AeXAgentUtil.exe /resetguid), and then restart agent. But when I checked them it had again the same new GUID.  So I've found on Altiris KB som...

Resolved! Agent licensing

Do you need a license for each agent with SSR? Trying to install an agent but is asking for a license key. I thought you only needed a license for the console.

St123 by Level 2
  • 175 Views
  • 1 replies
  • 0 kudos

Symantec Creating Recovery Image file of only few Kbs

Hi, As i am running the symantec daily backups and the daily backup's image file used to be of more than 250 GB,But from last 2 days i am observing the recovery image file is of only few Kbs. I am soory if anyone could not understand my problem cle...

SSR 2013: Host-level Hyper-V backups in Win Server 2012 R2

Hi! I am experimenting with Symantec System Recovery 2013 and host-level Hyper-V VM backups in Windows Server 2012 R2. My observations are as follows: 1. SSR is capable of doing hot Hyper-V backups. In this case Hyper-V creates intermediate snapsh...

Anguel by Level 4
  • 1594 Views
  • 26 replies
  • 2 kudos

Resolved! Host-level Hyper-V VM restore headaches

Hi! I am evaluating Symantec System Recovery 2013 and backed up a Hyper-V VM from the Hyper-V host (Windows Server 2012 R2). This seems to work fine so far. Unfortunately, the restoration of this VM caused me many headaches until I found out what w...

Anguel by Level 4
  • 380 Views
  • 3 replies
  • 0 kudos

Resolved! SSR 2013 to multible NAS

Hi I have a customer that earlier this year were attacked by a "ransomware" virus, that encrypted all data on two Windows 2008 servers. The customer bought 2xSSR 2013 and 2xSynology NAS. The customer want to backup to NAS 1 one week, remove this fr...

Problem with Symantec System Recovery

Hi all,  Our customer met a following issue. They deployed successfully the Symantec System Recovery on Windows 2008. It worked very well. But in a badly day, their server was failed a hard disk inside logical disk which was configured RAID 5. They ...

Server 2003 R2 vss errors

I inherited a Windows Server 2003 R2 standard edition x86. After doing a bit of checking on it, I see it has not been backed up for some time. Drive C is handled by an Adaptec controller card and has 2 drives in Raid 1 configuration with total spac...

mpd205 by Level 2
  • 673 Views
  • 5 replies
  • 0 kudos

Resolved! SSR2013(aktuell) auf Server2012R2 mit Hyper-V Maschinen

Ich habe gerade auf einem 2012R2 die aktulle SSR2013 Version installiert. Auf eine der Partionen sind die die virtuellen Maschinen abgelegt. Bei dem Versuch den kompletten Server (inkl. der laufenden virtuellen Maschinen) zu sichern ist der komplet...

Olafsch by Level 3
  • 562 Views
  • 4 replies
  • 0 kudos

SSR 2013

Is SSR 2013 compatible with win 8.1?

kaplang by Level 4
Partner Accredited
  • 311 Views
  • 4 replies
  • 0 kudos