cancel
Showing results for 
Search instead for 
Did you mean: 
ApplicationHA
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Guest - Guest clustering on single Hardware

Hi Community, I found a document mentioning about the limitations of guest to guest clustering on a virtualized environment (i.e. vmware ESXi) because of the I/O fencing problems in Veritas Cluster Suite 5.1   My question is do we still have this ...

Metehan by Not applicable
  • 1443 Views
  • 1 replies
  • 0 kudos

Resolved! AppHA, SRM, VOM VBS Orchestration

Hello All, I'm working through a complex implementation and have hit a couple of snags along the way. Maybe people have worked on verious bits along the way and may be able to contribute to an overall solution The object of this endeavor is to create...

Resolved! Application HA clustering has dropped a disk... :-/

Hi, After I completed the Application HA clustering of SQL2008 across two Windows 2008 R2 nodes, I found that the SQL installation's virtual Backup disk (M: for reference) remained on the first node after I'd initiated a switch to the second node via...

IP Configuration

Hi Expert, Is it possible to configure 1 VIP with two gateways. The network design is as below. 1- Redundancy between OLM server for the VIP. 2- If GW-1 is down traffic should shift to GW-2 with same VIP. As per network here engineer it is ...

amit_biet by Not applicable
  • 1238 Views
  • 2 replies
  • 0 kudos

Resolved! Have VCS to send email to admin upon fault

We a looking for a way to have VCS sends off an e-mail alert when the cluster faults to an admin. Looking at some of the previous solutions, I have come across two possible solutions. First I need to setup the traps to detect the fault. https://www-...

mkruer by Level 4
  • 2887 Views
  • 9 replies
  • 1 kudos

Resolved! Disable AutoFailOver from stopping services

I have several services that I am monitoring that are set to autofailover to a seconds system. It has some up that occasionally I need to restart a service without HA failing over to another system. I can disable the failover from happening using the...

mkruer by Level 4
  • 1797 Views
  • 4 replies
  • 3 kudos

Resolved! Configure GCO with vvr in linux

Totoal number of node on primary site 7. Management ip for all 7 nodes are defined and following are service gorup name with ip service group name 1- IP 10.1.1.1 service group name 2- IP 10.1.1.2 service gorup name 3- IP 10.1.1.3 service group name 4...

ktandel by Level 4
Partner Accredited Certified
  • 1452 Views
  • 2 replies
  • 0 kudos