cancel
Showing results for 
Search instead for 
Did you mean: 
ApplicationHA
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Application ha6.1 suppport matrix for vmware rethat 6 guest

hi, I have installed symantec ha console 6.1 on windows platform . Is this the newest verion for windows platform? I know linux platform you can install to 6.2 version.  what is suppport matrix for vmware rethat 6 guest OS for application ha? Wher...

ylin-123 by Level 4
Partner Accredited Certified
  • 2558 Views
  • 1 replies
  • 0 kudos

failed to bring up HeartBeat interface with GAB config

Dear Experts,    I'm facing an issue here in cluster setup 8+2  I have managed to create 1+1 cluster and when trying to add the 3rd node I got stuck in gabconfig step  below is the /var/adm/messages  Jun 21 22:49:50 MM-BL2 bnxe: [ID 801725 kern.i...

Resolved! Symantec AppHA doubt

Hi all, I need to understand Symantec AppHA can help me with the latest documentation to refer as well as the compatibility, prerequisites etc... And also how it differs from VmWare AppHA. Thanks, Nayab

Nayabsk by Level 6
Partner Accredited
  • 3706 Views
  • 18 replies
  • 1 kudos

Resolved! symantec AppHA problem

Hi my esxi version is 5.5 u2 and my vcenter version is 5.5 u1 now i have downloaded VCS 6.1 & High availability console 6.1 & application HA 6.1 i have reade all of documents but now i am so confused pleas say me ehat is the order of installing syma...

Resolved! Solaris 10 + Zones + ZFS + VCS

Hi all, I don't have a lot of experiences on VCS I have 2 servers on Solaris 10 update 11, installed on ZFS (rpool), and I want to do a Cluster for an application APP   Node A = zonea (zonepath for zonea is ZFS / local disk  ZFS ) Node B = zoneb...

user_new by Not applicable
  • 1309 Views
  • 1 replies
  • 0 kudos

Resolved! Oracle upgrade on veritas cluster 5.1 SP1

Hi ,   We are planning to upgrade oracle from 10.2.0.4 to 11.2.0.3 on windows 2008 environment. We have SAP Portal Ehp1 for that uses this database. both the SAP and oracle group are clustered with the VCS version 5.1 SP1 over 2 nodes. Would like to ...

sreek by Level 2
  • 1453 Views
  • 3 replies
  • 0 kudos

Resolved! Unable to configure appha on vmguest after installation.

Hi, I've just finished installing the AppHA guest component on a RHEL 6 platform.   However in my AppHA console in the AppHA tab is says "unable to retrieve status of this virtual machine" The log is as follows   18:54:40 UTC+0800: Debug Logs 18:54...

valor88 by Level 3
Partner Accredited
  • 1013 Views
  • 1 replies
  • 0 kudos

AppHA Services were disabled after installation

Hi there , I deployed AppHA on one of the VM today, but I noticed that the AppHA services were "disabled" after installation. I check "hastatus", it shown that could not connect to VCS engine. Anyone face this issue before ? Please help. Cheer Eric Y...

EricYCK by Level 4
Partner
  • 642 Views
  • 1 replies
  • 0 kudos

Resolved! installing srm AFTER ha console

i have already installed in a production env symantec ha console (and various agents, of course). now the customer wants to install and use also vmware srm, is ti possible to add the module for symantec ha console, OR is better to start from scatch? ...

mgambetti by Level 4
Partner
  • 531 Views
  • 1 replies
  • 0 kudos

Resolved! Failover to secondary system upon ungraceful shutdown

I have configured a cluster with monitored services and it works as intended with one exception. If I hard/ungraceful power down, cluster does not fail over to the working system and start the services automatically. Below is the script that I use to...

mkruer by Level 4
  • 1150 Views
  • 8 replies
  • 1 kudos

Resolved! How to resolve CPI ERROR V-9-0-0 arch_sys undefined

  Hi,   I'm installing Storage Foundation and High Availability (SFHA) on two nodes. Everything is configured correctly based on the given document.   But, in the middle of installation, it returns this error: CPI ERROR V-9-0-0 arch_sys undefined   I...

rifco by Level 3
  • 2670 Views
  • 9 replies
  • 0 kudos

Resolved! Problem with the Oracle VCS 5.1 resource and DetailMonitor = 1

Hi, I am attempting to configure the DetailMonitor = 1 option of the Oracle resource in a service group but am running into LogonUser failed error messages in the Oracle_A.txt file. The issue is with the user / domain and password I am using and, I a...

Inabus by Level 2
  • 970 Views
  • 4 replies
  • 0 kudos

Resolved! plugin not visible on VCenter

hello,   I wanted to try appHA in our sand box : VCenter server 4.1VCenter client 4.1VM running RHEL5.5   This installation worked fine, but nothing appears in the VCenter no ApplicationHA tab. any ideas ?   Regards, Hervé