cancel
Showing results for 
Search instead for 
Did you mean: 
ApplicationHA
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Unable to configure multile application for monitoring.

Hello all. I used Application HA 6.1 on windows server 2012 R2. I read this document( http://www.symantec.com/docs/TECH159846 ), then I performed the commands to add an application to an existing configuration. However, commandline put error messe...

k-masa by Level 2
  • 3270 Views
  • 1 replies
  • 0 kudos

failed to bring up HeartBeat interface with GAB config

Dear Experts,    I'm facing an issue here in cluster setup 8+2  I have managed to create 1+1 cluster and when trying to add the 3rd node I got stuck in gabconfig step  below is the /var/adm/messages  Jun 21 22:49:50 MM-BL2 bnxe: [ID 801725 kern.i...

Resolved! VVR paused due to network disconnection

Hi all. I have a global cluster with 2 minicluster systems with solaris 10 installed (SPARC) primary: MIVDB01S - 172.22.8.132 secondary: MILDB08S - 10.66.11.148                I stopped the secondary (init 0) for 3 days, and after that I startup ...

tgenova by Level 4
  • 6345 Views
  • 8 replies
  • 0 kudos

Resolved! Network adaptor unavailable

Hi All, After upgrading a cluster server from windows 2008 R1 to windows 2008 R2 the server cannot connect to the network anymore. The adaptor is still there and the heartbeats are working , but the principal network cannot be reached. The server ...

Blizzie by Not applicable
  • 4260 Views
  • 2 replies
  • 1 kudos

after mirroring plex, ssh service are not running

hi all, i have some productions server that are using SFHA Cluster. i need to mirroring volume to new storage using. (#vxassist -g DGname mirror VOLname alloc="vxdisk1 vxdisk2 . . . . vxdisk13") after 190 minutes ssh service cannot be access. i ab...

dh3kan by Level 3
Partner Accredited Certified
  • 1023 Views
  • 1 replies
  • 0 kudos

Resolved! AppHA, SRM, VOM VBS Orchestration

Hello All, I'm working through a complex implementation and have hit a couple of snags along the way. Maybe people have worked on verious bits along the way and may be able to contribute to an overall solution The object of this endeavor is to create...

Resolved! Application HA clustering has dropped a disk... :-/

Hi, After I completed the Application HA clustering of SQL2008 across two Windows 2008 R2 nodes, I found that the SQL installation's virtual Backup disk (M: for reference) remained on the first node after I'd initiated a switch to the second node via...

Resolved! Reccuring unmount of Diskgroups

Hello Experts, After finding that some of our DGs were unmounted, i have executed VCS clear command on resources of DG which were faulted and then made them online after it. Eventually, DGs were mounted and mountpoints were present to OS. After 2-3 d...

Resolved! Unable to configure appha on vmguest after installation.

Hi, I've just finished installing the AppHA guest component on a RHEL 6 platform.   However in my AppHA console in the AppHA tab is says "unable to retrieve status of this virtual machine" The log is as follows   18:54:40 UTC+0800: Debug Logs 18:54...

valor88 by Level 3
Partner Accredited
  • 1195 Views
  • 1 replies
  • 0 kudos

IP Configuration

Hi Expert, Is it possible to configure 1 VIP with two gateways. The network design is as below. 1- Redundancy between OLM server for the VIP. 2- If GW-1 is down traffic should shift to GW-2 with same VIP. As per network here engineer it is ...

amit_biet by Not applicable
  • 1238 Views
  • 2 replies
  • 0 kudos

Resolved! Missing VCS "VVRTypes.cf"Agents

Need help/ advice on how to recover missing VVRTypes.cf   System Info OS RHEL 6.1VCS Version 5.1 rp3 Objective To enable VVR in VCS-GCO environmentDuring the process of creating RVG for VVR Service Group; I  found that   Done the following Checks (i)...

Resolved! Disable AutoFailOver from stopping services

I have several services that I am monitoring that are set to autofailover to a seconds system. It has some up that occasionally I need to restart a service without HA failing over to another system. I can disable the failover from happening using the...

mkruer by Level 4
  • 1797 Views
  • 4 replies
  • 3 kudos

Resolved! resource state UNKNOWN

Hi all. I have a single node cluster, ready to become a part of a global cluster in the future. I restarted the node (system) starting with this situation: # hagrp -state     #Group         Attribute             System     Value     AppService     ...

tgenova by Level 4
  • 6679 Views
  • 10 replies
  • 1 kudos

Resolved! Problem with the Oracle VCS 5.1 resource and DetailMonitor = 1

Hi, I am attempting to configure the DetailMonitor = 1 option of the Oracle resource in a service group but am running into LogonUser failed error messages in the Oracle_A.txt file. The issue is with the user / domain and password I am using and, I a...

Inabus by Level 2
  • 1382 Views
  • 4 replies
  • 0 kudos

Resolved! Problem in switching over the resource group

Hi All   I am facing problem in switching over the resource group.   When I use hagrp -switch  -to cmd to swithch over a Resource group , the resource group switch over absolutely fine as shown below 2012/04/03 13:02:14 VCS INFO V-16-1-50135 User roo...

cmvs by Not applicable
  • 909 Views
  • 1 replies
  • 1 kudos