Topics with Label: Configuring

Resolved! Backup Exec Agent for IBM AS400

Hello - does Backup Exec 15 or any other Veritas/Symantect prodcuts support backing up data on any one of these: IBM/iSeries/AS400/db2/JDE? Thanks! Mendel

Resolved! Duplication of Backup sets to be scheduled

Hello all, I am trying to find a way in BE 2014, how to schedule duplication of backup sets. I am duplicating one server (backup set) this way: https://www.veritas.com/support/en_US/article.HOWTO98918 I have about 10 servers and I need to create ...

Resolved! About shrinking the catalogs

Hi all, For my 3600 appliance, I've been backing up the catalogs (D:\BackupExec\Catalogs) regularly by burning the whole folder into a DVD. For a pretty long while since use, it's been good and remained at around 3.5 GB. However, in the last month, ...

Resolved! Upgrade backup appliance 3600 R2 to R4

Hello, I have received a notification from symantec that the upgrade for the backup exec appliance R2 and R3 to the new R4 is now available... anyone knows of any documentation or steps or notes about the how to perform the upgrade? the appliance...

Resolved! Backup Cluster Hyper-v Subnet

Hi, Forgive my English first, I have configured a Hyper-V cluster with two nodes and a storage cabin. When I make a backup of the cluster gives me a different subnet always bug, there is a specific procedure for backing up a cluster of hyper-v on ...

Simplified Disaster Recovery (SDR)

Hi, If the D drive of my backup appliance 3600.R3 is almost full i.e. 5 TB and with this setup I create the SDR disk (simple disaster recovery disk) , how much size should I expect of SDR disk ? I wonder if the creation of SDR disk would take the ba...

Different Time in WebUI and System Time

Good Day. Symantec Backup Exec 3600 Model: 3600 Version: 3.1.2190.0 I have problem for Different Time in System and WebUI: In Last year (september 2014) in Russian cleaned Daylight saving (kb 2998527), But Applince from WebUI not found Updates ...

Resolved! Appliance WebUI does not display information

Hello We are using BE3600R2 and whenever we using WebUI we are unable to find details related to Disk Raid Battery It says No disk No Raid and No battery. Please find the attached screenshot for more information. Thank you ...

Resolved! BE Appliance- DNS Configuration Issue

Hi, I am trying to run BE Appliance initial configuration, I have entered a static IP. But I don't have DNS Server or DHCP server , When I entered any DNS IP it give an error that the DNS server IP is incorrect or the server does not exist. And ...

Symantec Appliance 3600 and SCSP agent logs.

Hello! We use Symantec Appliance 3600. Recently I noticed, that the folder C:\Program Files (x86)\Symantec\Critical System Protection\Agent\scsplog оn appliance server has more than 20Gb size and C:\ drive has less than 4 Gb of free space. How ca...

Resolved! About changing the Backup Exec Service Account

Hi guys, I was trying to change the BESA from the default one. But since I failed to do so using the RemoteLaunch (Configuraton and Settings -> Backup Exec Services -> Edit Credentials), I tried the BEUtility. However, it was in vain with the errors...

Dedupe doesn't seem to be working properly 3600 R3 was R2

Appliance was R2, was upgrading to R3 twice, once in September and once again at the end of October. Ops center crashed on the first appliance. 3 months ago I was sitting at 2.3 to 2.5TB of dedupe storage at a 16.1:1 ratio, this was directly before ...

Resolved! Backup exec appliance 3600 R2

while pushing the agent to the servers encounter with credential error and sometime WMI error and the while taking backup of SQL database server after finishing the backup while verify the backup encouter with constincy check error.... Please can a...

BEA RemoteApp Disconnected-Wrong server name in RDP

I have a new BEA 3600 running Backup Exec 2012 and it cannot create a good RDP. The RDP it creates has the wrong server name. I connect to the Appliance. Click on Manage then Remote Launch. Click Backup Exec Administration Console Utility. If I...

Resolved! Backup Exec 2012 cannot detect the Dell TL 2000 Media Changer

Dear All, I owned a backup exec 3600 appliance and have configured a tape out to Dell TL2000 tape library. recently the BE reported that one of the tape drive malfunctioned. and I got dell to replace the problematic drive. unfortunately the pro...

Resolved! Help required to design backup solution using Backup Exec 3600 Appliance ( NDMP )

Hi All , We are trying to design backup solution for one of our customer . Please find the below block diagram for backup solution. We have some queries designing the backup solution. Is it poss...

Time sync not working (anymore....)

Hi all we are experiencing problems with time sync between the appliance and 3 other media servers. They are all in a domain (Windows DC with PDC time sync) but the appliance always shows some "lag" like 40seconds to 1 minute against the other serve...

Resolved! Best Practices for Implementing Two Backup Exec Appliances

Greetings to the well of knowledge... I recently purchased two BE3600R2 appliances running BE2012. My intent is to have one appliace running locally in our main office for our regular backups and another located at one of our remote sites for repli...

Backup Agent Oracle on Windows

Hi, I try configure a job of database Oracle on Windows Server. I follow this steps http://www.symantec.com/business/support/index?page=content&id=HOWTO73873 Username and password of oracle are OK, agent oracle of the server is configured When ru...

BEA 3600: Security setting enquiry

Recently we have installed a BE Appliance 3600 in our office and I have a question concerning its security configuration. For the 3 usable NICs (eth1 - 3), we have already connected each of them to separate subnets (e.g. subnet A, B, C for easier ill...

VOX

Discussion Posts