cancel
Showing results for 
Search instead for 
Did you mean: 
Backup Exec
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Backup Exec 22 - Technical Preview Program now open for recruitment

We are currently recruiting customers who are interested in participating in the upcoming Backup Exec 22 Technical Preview Program. The Technical Preview Program for the upcoming release of Backup Exec contains some new features which continue to pos...

klauskresnik by Moderator
Employee Accredited Certified
  • 946 Views
  • 0 replies
  • 2 kudos

How to deploy Backup Exec via the AWS Marketplace

How to deploy Veritas Backup Exec on AWS Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to AWS for your in-house virtual and physical environments and protects cloud-based workloads in AWS. Veritas Backup Exec helps...

LilavatiRaykar_0-1619424553997.png LilavatiRaykar_1-1619424554020.png LilavatiRaykar_2-1619424554034.png LilavatiRaykar_3-1619424554046.png

How to deploy Backup Exec via the Azure Marketplace

How to deploy Veritas Backup Exec on Azure Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to Azure for your on-premises environments and protects cloud-based workloads in Azure. Veritas Backup Exec helps customers r...

LilavatiRaykar_0-1619423636352.png LilavatiRaykar_1-1619423636355.png LilavatiRaykar_2-1619423636365.png LilavatiRaykar_3-1619423636369.png

Useful links for Upgrading Backup Exec

At its most basic, the upgrade procedure for Backup Exec is simply running installation media for the most recent version on an existing Backup Exec server. Backup Exec 15, 16 and 20 can be upgraded to Backup Exec 21 with this method. Article 1000443...

step upgrades.jpg
rdmchugh by Level 1
Employee
  • 2237 Views
  • 0 replies
  • 9 kudos

Invalid signature

Ok,I have seen a lot of articles and discussions on the topic, but I cannot seem to make headway.  I have had this issue since BE 2010 R3, but I recently upgraded to 2014 and still have the same issue, different error code.I have an EMC Isilon Cluste...

Resolved! BE2012, CASO and DataDomains

I was wondering if anyone had experience configuring the following Site 1: (Primary Site) 1 x BE2012 Server with CASO 1 x DD All licenses for DDBoost replication etc   Site2: (DR Site) 1 x BE2012 server and media agent 1 x DD All licenses etc...   Wh...

Resolved! VMware VM authenticating issue.

Hi, We are doing a installation. BElow were the details:- 1. VMware ESXi 5 (In three server) with VCenter. 2. BE 2012 on Windows 2008 R2. 3. Vmotion is enabled. 4. Backup were in disk.   Now , the VMware admin have provided the root and its password ...

Resolved! BE 2012 VMware agent backup directly to tape.

Hi, I have ESXi VSphare 5 (three server). Alll the VM were in the EMC VNX storage server. VCenter server. I have VMware agent (Three) , one windows agent and tape library option (for extra Drive). We were planning to take VM backup directly to tape. ...

Using the scratch tape while backup is running.

Hi, We have the following details :- 1. Two Hyper-V server (Windows 2008 R2). 2. BE 2012 SP1 on Windows 2008 R2. 3. Tape Library (Single Drive).(24 slots) 4. Storage (EMC VNXe 3100). We have partitioned the tape library where two slots on each partit...

Cannot to connect BackupExec to Data Domain with OST Plug-In

Trying to connect via creation of a disk device. When clicking "Add OpenStorage" device in Backup Exec disk devices (Backup Exec 2010 R3 SP2), I am able to get to the point as follows in the attachment. I can get all fields to work, it sees it as a "...

drmont1 by Level 3
  • 2537 Views
  • 8 replies
  • 1 kudos

Resolved! IBM TS3200 FC interface for BE 2012 VM backup.

Hi, We were going for a Symantec BE 2012 deployment of the following infra. Three VMware host server . One Vcenter server. The VMware VMs were inside the SAN storage server, with two SAN switch for high availability. A Tape library is connected with ...

Backup Exec 2010 R3: NDMP restores to EMC VNX 5500 do not work

Hi, The issue on hand is, that, as the title says, i cannot restore NDMP Backups to a EMC VNX 5500. I do not get an error Message, the Job simply hangs after loading the Media. I also cannot cancel such a job, if i try, the job hangs with the status ...

MPieper by Level 4
  • 557 Views
  • 4 replies
  • 1 kudos

Snapshot creation by BE 2012

Hi, We have the following;- BAckup Exec 2012 on Win 2008 R2 (64 bit). EMC VNXe 3100 (Dual Controller). Hyper-V servers with 6 to 7 VMs.   We were taking the VMs backup from the Hyper-V server. The snapshot is not enabled inside the policy. Backup use...

Resolved! restoring from B2D on Datadomain

Hello, I am running a backup from Backup Exec 12.5 to a CIFS share on a DataDomain dd630.  The backup seems to work fine, but when I attempt to restore files from the backup, the restore job just runs and runs, with Current Operation going back and f...

BE 2012 and Data Domain w/ DDBoost

Background:  So we have Backup Exec 2012 and two Data Domain DD620's.  We have all the required licensing including the Data Domain DD Boost and replication licenses.  I have installed the Open Storage Technology (OST) plugin 2.5.0.3 as suggested for...

CRoth2 by Level 3
  • 3941 Views
  • 32 replies
  • 1 kudos

Resolved! Scalar 50 Slots Not Showing Up

Hey All -  I'm having an issue getting a Scalar 50 to show up in Devices in BE 2010.  Right now, I have the Scalar 50 (which has 2 drives) a Cisco MDS9124 and a server running BE 2010.  On the MDS9124, I have one of the Scalar Drives, the Scalar TLU,...

Resolved! Snapshot Technology

We're using the BE2012 with W2K8 R2, mount with one LUN of EMC SAN storage as U: Drive. We perform this RAW backup of U: Drive everyday, and we execute the pre command to take snapshot of this U: before the backup runs. Recently, we updated the setti...

Backup using NDMP to EMC VNX 5300

Hi all, We would like to know if there are limitations / problems with the NDMP option for a EMC VNX5300.  Is it possible to restore granularly? Thanks, Marco Tafur Qualitas Techonolgy & Services

Granular restore of EMC Celera

Hi, We are looking at creating CiFs but require data to be restored by the file level. Currently doing a NDMP backup will only backup/restore the whole file system. Is there a way to backup/restore to a file level? I believe it cannot be done via NDM...

FJam by Level 2
  • 535 Views
  • 6 replies
  • 0 kudos

Resolved! Can BE support LTO3 with DataDomain VTL

I use Backup Exec 2010 R3 with DataDomain VTL. As DataDomain Compatible list,it support LTO1,2 and 3. But,BE HCL support only LTO1. Can I extend BE to support DataDomain LTO3 VTL.

SONGYOD_KH by Level 4
Partner Accredited
  • 527 Views
  • 5 replies
  • 0 kudos

Backup Exec Zoning

Hi All - I have a very simple issue (which I am sure is very simple) but I am inherting issues from a former IT Admin and I dont have too much experience with it.   Basically I have my media server (BEX), my SAN, and my Tape library connected all to ...

Backup Stopped and Running Same Time

Hello Everyone -   I am having a very complicated issue that I cannot decide is hardware or software.   I have a backup job which runs.  BEX reports the job completed successfully, however when i check my server to monitor the next job, the first job...

Labels