cancel
Showing results for 
Search instead for 
Did you mean: 
Backup Exec
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Backup Exec 22 - Technical Preview Program now open for recruitment

We are currently recruiting customers who are interested in participating in the upcoming Backup Exec 22 Technical Preview Program. The Technical Preview Program for the upcoming release of Backup Exec contains some new features which continue to pos...

klauskresnik by Moderator
Employee Accredited Certified
  • 946 Views
  • 0 replies
  • 2 kudos

How to deploy Backup Exec via the AWS Marketplace

How to deploy Veritas Backup Exec on AWS Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to AWS for your in-house virtual and physical environments and protects cloud-based workloads in AWS. Veritas Backup Exec helps...

LilavatiRaykar_0-1619424553997.png LilavatiRaykar_1-1619424554020.png LilavatiRaykar_2-1619424554034.png LilavatiRaykar_3-1619424554046.png

How to deploy Backup Exec via the Azure Marketplace

How to deploy Veritas Backup Exec on Azure Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to Azure for your on-premises environments and protects cloud-based workloads in Azure. Veritas Backup Exec helps customers r...

LilavatiRaykar_0-1619423636352.png LilavatiRaykar_1-1619423636355.png LilavatiRaykar_2-1619423636365.png LilavatiRaykar_3-1619423636369.png

Useful links for Upgrading Backup Exec

At its most basic, the upgrade procedure for Backup Exec is simply running installation media for the most recent version on an existing Backup Exec server. Backup Exec 15, 16 and 20 can be upgraded to Backup Exec 21 with this method. Article 1000443...

step upgrades.jpg
rdmchugh by Level 1
Employee
  • 2236 Views
  • 0 replies
  • 9 kudos

How to generate SMS message alert for failed backup's

In NetBackup Opscenter is it possible to change the information sent out in the e-mail alerts.  For example i want to change the output to move the server name up in the alert so i can send this to a cell phone as a txt and not just an e-mail. Is th...

Error message : E00084EC

we use exec12.1. Job ended: Thursday, July 18, 2013 at 12:19:09 AM Completed status: Failed Final error: 0xe00084ec - A tape read/write error has occurred.  This is usually caused by dirty read/write heads in the tape drive.  Clean the tape drive, ...

Migrate BE 2010 R3 from Win2003 32-bit to Win2008 64-bit server

I have seen various articles on doing migrations between 2003 to 2008 servers and from 32-bit to 64-bit.  Is there a process to migrate and keep our current catalog/database/jobs when going from Win2003 32-bit to Win2008 64-bit? (Could Migrating be a...

Teri by Not applicable
  • 298 Views
  • 2 replies
  • 1 kudos

Resolved! Equal Logic Array Util. Software on a HP Server

Hello Everyone,  I am getting the following error while attempting to backup my exchange mail server.  V-79-57344-655072: The Connection to the target sysem has been lost. Backup set canceled   Following the Error Id i was brought to here: http://www...

Tape backups failing. Error: E00084F4

Hi,   I have been struggling to get disk to tape backups working for several months now without any success.   Every time we try to run a backup, after about 30 seconds, it fails due to an "Unknown Error" with code E00084F4.   I must have read every ...

4Paul4 by Not applicable
  • 255 Views
  • 1 replies
  • 0 kudos

Resolved! Backup Compression Rate & issues

Hi i'm using symantec backup exe 12.0 with Service pack 5. We are having HP ultrium LTO 448 backup drive. For the last 4-5 months when i backup data to the tape drive the compression rate is 1:1 on 400 GB tape and the data saving on it is just around...

Resolved! Inserted tapes are not showing up in Backup Exec 9.1

Hi there, I have been using an internal Dell backup tape drive for some time with Backup Exec 9.1 without any issues. The drive became faulty and it has now been replaced with an HP Storageworks DAT72 internal drive. Since replacing the drive Back...

IDR Wizard (2010 R2) can't load network driver

Hello,     the network drivers will not load successfully by using the following environment: Hardware: HP ProLient DL380 G7 Server NICs (builtin): NC382i   Software: BackupExec 2010 R2 Revision 4164 OS: Windows 2003 Server R2 x64 (latest SP and Patc...

BerndS by Level 3
  • 1162 Views
  • 13 replies
  • 0 kudos

Resolved! Backup Exec 2010 R2 + MSL2024

Hi , We just implemented a new installation of Backup Exec 2010 R2 on Windows Server 2008 R2 on HP G6 server. Also installed is a tape library MSL2024 connected to server. In the OS - device manager ,both the tape drive and medium changer is shown wi...

ThaveshinP by Level 3
Partner Accredited
  • 1279 Views
  • 5 replies
  • 0 kudos

Resolved! BackupExec 12.5 problem with HP changer

Hi, BackupExec 12.5 doesn´t recognize a HP SureStore DAT 40x6 Autoloader C5715 as a changer, but only as a streamer. HP tools and Windows2003 server do recognize the changer. Any ideas how to get the changer to work in BE 12.5 ? Thanks Oliver

Roethel by Not applicable
  • 383 Views
  • 4 replies
  • 0 kudos

Resolved! Drive LTO-2 and Cartridge LTO-3

So this is my problem. I have an HP Tape Library MSL2024 Ultirum 448 and its drive is LTO-2 and I have Cartridges LTO-3.... Does it change Cartridges LTO-3 by LTO-2 is the only solution???? Thanks a lot.!!

Restoring / Redirecting SQL Database to test server

Hello Everyone, I just built a test SQL server and the purpose of that was to test and make sure Im getting good SQL backups to tape. I wan to redirect misc. databases to my test server and verify I can restore them with no problem should a disaster...

Backup Exec 2010 Unix Agent

Hi: I'm concerned about using the Unix remote agent; I mean does it include the Open File feature? I´ve a scenadio on which customer uses Oracle on Unix, through a SAN, so even whan I know NBU can do a great job, I don't want just to quit BEWS 2010,...

vfernandez by Level 2
Partner Accredited
  • 229 Views
  • 1 replies
  • 0 kudos

Question regarding Backup Exec 2010.

Hi there, my IT manager requested I try to get some answers for him regarding Symantec Backup Exec 2010 He understands that we can purchase Symantec Backup Exec 2010 console with a few agents. HIs questions are as follows: 1) Can we purchase additi...

Carlo1 by Level 2
  • 289 Views
  • 4 replies
  • 0 kudos

End of Marker Unreadable and AutoRun/TUR requests

Does anyone know if the problem with AutoRun and TUR requests can cause EOM unreadable?  HP advised me to add it to my registry...  The Symantec article confuses me a bit as it says it needs the TUR requests? http://support.microsoft.com/default.aspx...

Meg_G by Level 4
  • 364 Views
  • 3 replies
  • 0 kudos

Resolved! BackupExec 12 (SP3) Showing all tapes as Cleaning Tapes

We are running an HP MSL5026 tape library with two DLT drives. I changed tapes last Friday (as I do every week) and marked all the newly inserted tapes (tapes had been used before) as scratch. When i came in today, All the tapes in the library other ...

acl03 by Level 4
  • 519 Views
  • 5 replies
  • 0 kudos
Labels