cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Remove or modify HA Fire Drill actions

Looking for a method to modify or remove particular action points for the HA Fire Drill.  As an example, the Mount Agent action 'mountentry.vfd' specifically checks for mount entries in /etc/filesystems.  By chance, our environment and admins requir...

notB by Level 1
Partner
  • 835 Views
  • 0 replies
  • 0 kudos

set-addr is /etc/ltttab file

Hello, I have configured VCS cluster with putting the MAC addresses of the partnered node, but I am looking some of our old cluster they configured mac addresses  as well in /etc/llttab file.  set-addr 1 en1 xx.xx.xxx.xx.xx is it important ?  

mokkan by Level 6
Certified
  • 432 Views
  • 1 replies
  • 0 kudos

after database integration LPAR went to HUNG state.

Hi, I have intergrated  oracle database in vcs active-pasice LPAR cluster node. after integration have online server grp on node A. which is done successfully. for testing i have switch over my db SG on another node but on node B oracle home was not...

Tiger09 by Level 4
  • 527 Views
  • 1 replies
  • 0 kudos

Bind Steward to a specific IP

Is it possible to bind Steward to a specific IP? The question arise after we realised in one deployment where the host with Steward has several IPs from the same network was sending Steward responses from different IP from time to time which was not ...

Mouse by Moderator
Partner    VIP    Accredited Certified
  • 639 Views
  • 2 replies
  • 0 kudos

Resolved! File permission change for directory in vcs

Hi All ,   We have a directory say /test which is under vcs in AIX ,The filesystem is JFS2 .  The owner and group of directory is root:root .The filesystem is currently mounted by vcs . canwe chnage the permission with chown command . NOTE: i do...

Dilipsun by Level 2
Certified
  • 1545 Views
  • 4 replies
  • 3 kudos

Resolved! unexpected reboot

Hi all, I am runing a SFRAC environnement and one of my 2 nodes cluster frequently reboots unexpectedly. I went through the OS logs and the VCS engine_A but didnt find any clue. Is that an eviction ? when i run lltstat, i can see some errors coun...

kwakou by Level 4
  • 1710 Views
  • 5 replies
  • 0 kudos

Resolved! Sybase licence and VCS configuration

Hello, We have configured the sybase database  instance under VCS,  but binaries are installed on shared drive as well.  When it comes to sybase licence, database team generated using hostid.  If we want to share the sybase licence between both node...

mokkan by Level 6
Certified
  • 578 Views
  • 2 replies
  • 0 kudos

Resolved! SFHA "In-Family" Upgrade ?

While discussing options to upgrade SFHA cluster (standard, phased, rolling), the topic of  "In-Family" upgrade was mentioned. I have never heard of this, so want to ask if anyone has experience with In-Family upgrade ? The concept is that In-Family...

Haniwa by Level 4
Partner Accredited Certified
  • 913 Views
  • 2 replies
  • 0 kudos

Resolved! Resource faults issue

Hi Team, Many times we face resource faults alerts on our AIX server,but when we check it shows all are running fine.  Also, when checked logs it shows not (initiated by VCS) alerts. Our main concern is to troubleshoot, why we get these alerts and...

Resolved! VCS verificaiton and Automation

Hello Guys, We do configure many VCS cluster and we would like to verify all the confiugraion before we hand over to customer. We would like to automate the verification. here is my plan to do basic verificaiton - Verify LLT config -Verify  GAB co...

mokkan by Level 6
Certified
  • 833 Views
  • 2 replies
  • 3 kudos

Resolved! Share mount between 2 service groups

Hello  Guys, I am in the process of setting up 2 service group and runs independently, but one of the mount needs to be shared between both service groups.   How can I do that?

mokkan by Level 6
Certified
  • 940 Views
  • 4 replies
  • 0 kudos

Resolved! VCS stop and service group offline quesiton

I have a quick question regarding service group offline. We only want to bring up/down services when we execute hagrp  -online/-offline manually.   When VCS shutdown, we don't want to bring up the service offline. I know if we freeze it won't go to...

mokkan by Level 6
Certified
  • 2860 Views
  • 2 replies
  • 0 kudos

Resolved! Unable to bring the Service Group online.

Hi All, I tried to bring a SG online in a node but it's not comming online. Let me explaing the issue.   We did reboot of a node aixprd001 and we found that /etc/filesystem is corrupted so the SG bosinit_SG is in partial state since lot of cluster...

Resolved! Why does process vbsd.bin utilize a lot of CPU resource

Hi  I wonder why the process vbsd.bin always utilize a lot of CPU resource ( always > 10%) after I configured the VBS on it. What does it do? Is there anything I've to check? Here is a captured stat reported by topas.   Thank you Supaprapat N...

supaprapat by Level 2
Partner Accredited
  • 580 Views
  • 2 replies
  • 0 kudos

Resolved! SG is not switching to next node.

Hi All, I am new to VCS but good in HACMP.   In our environment we are using VCS-6.0, I one server we found that the SG is not moving from one node to another node when we tried manual failover using the bellow command. hagrp -switch <SGnamg> -t...

Resolved! Application Agent PID file quesiton

I have  created a unix scirpt to do some task and enf of the task it will create a local file in /var/lock/abcd.lock file. I created a application resource and put  /var/lock/abcd.lock for PidFiles attribute. The lock file is creating, but not resou...

mokkan by Level 6
Certified
  • 1572 Views
  • 8 replies
  • 0 kudos