cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

NetApp snapmirror agent error on Redhat LINUX

Hi, We install VCS 6.0.1 on redhat enterprise server 6 and we use Netapp Snapmirror agent for replication the LUN. When try to failover to other system, it trigger error as below: V-16-20059-1012 (znmp157) NetAppSnapMirror:US-FIX-ALL-DB-SnapMirror:on...

Kingkcube by Level 3
Certified
  • 347 Views
  • 1 replies
  • 0 kudos

Resolved! VCS 5.0 MP4 on RHEL 5.5 64bit

Hi to all,   we have installed vcs 5.0 MP4 on 5.5 64bit. The storage is an IBM DS3000. We have RDAC as multipaths  controller, so we have only a device path for any lun ( sdX, sdY, etc ).   We would like to use LVM so we would know if there are probl...

enzo68 by Level 4
  • 289 Views
  • 6 replies
  • 0 kudos

Resolved! Fencing without fencing?

Hello, as far as I understand, I/O fencing consists of two separate concepts, which can both be described with the two different meanings of the word "fencing":   fencing(1): membership arbitration by fighting ("fencing") for the majority of coordina...

jf7640 by Level 3
Partner Accredited
  • 817 Views
  • 2 replies
  • 1 kudos

VCS ERROR V-16-2-13067 SERVER01 Agent is calling clean for resource because the resource became OFFLINE unexpectedly, on its own.

Hi,, I have 8 nodes Veritas cluster running on RHEL 5.5 in which we are using Firedrill resources. For some time now FireDrill resources faulted everyday with below error.   LOGS:   2011/01/21 20:38:06 VCS INFO V-16-20054-101 SERVER01 MirrorViewSnap:...

Resolved! Error:Probe is not completed on VCS nodes

Hi All, I am new to VCS. I have formed two node cluster on VMware server and trying to configure simple fail-over group of apache and Solaris zones (different) Both Apache and Solaris Zones are on separate shared storage (vxvm disk group) as follows ...

Anish by Level 4
  • 512 Views
  • 2 replies
  • 0 kudos

Resolved! Preferred HA / DR solution - VCS or MCS

Just looking for Symantec's preferred solution they would recommend for HA and DR solutions -  Veritas Cluster Server or Microsoft Cluster Service.  Both seem to be offered as possible solutions and the whitepapers say both work but don't clearly sta...

Resolved! NFSv4Support over Solaris 10

In VCS 5.1 SP1 Administration Guide (Solaris), NFS Service Group configuration, paragrah "Sample configuration for a single NFSv4 environment" mentions 'NFSv4Support' parameter for this NFS version support and lock recovery, but this parameter doesn'...

Robur by Level 3
  • 325 Views
  • 3 replies
  • 1 kudos

Resolved! Need help to configure Event Trigger - VCS

Hi All,   We have a requirment to configure Event Trigger (sysoffline, sysjoin). Cutomer provided a shell script which controls their applcaiton. We need to call this script via sysoffline and sysjoin.   We have added the below line on sysoffline and...

Resolved! VCS on Windows and Red Hat

Hi All, I am facing a new challenge with Veritas Cluster Server. In the past I only use VCS on Solaris boxes and for a new project I have to design a HA solution for Red Hat and Windows Hosts. Those hosts are mostly virtualized (40:60 P/V) and are di...

_14 by Level 2
Partner Accredited
  • 508 Views
  • 3 replies
  • 0 kudos

Resolved! VCS 5.0 NIC replaces

  Hi to all,   we have a two nodes veritas cluster server 5.0 on REDHAT 5.5; below the output of command "hastatus -sum"     -- SYSTEM STATE -- System               State                Frozen                 A  dbcccrm1             RUNNING          ...

enzo68 by Level 4
  • 893 Views
  • 7 replies
  • 1 kudos

Resolved! Sync users on cluster nodes and solaris zones?

We're implementing a 4 node VCS cluster (Sun servers) with multiple solaris zones in operation within the various service groups. The zones will failover from node to node as required under the control of VCS. Are there any recommended utilities or b...

ant_oco by Level 2
  • 399 Views
  • 3 replies
  • 0 kudos

Running StartProgram and StopProgram manually

I am writing a script that will allow members of an application development team to restart/stop/start their applications which run under VCS without triggering a failover or fault within the cluster. I'm doing this by simply freezing the service gro...

SFRAC 5.1 SP1 on RedHat Linux - ASMInst Problem

Hi All I'm using the above.  It seems everything was working fine but we're due to go live in 3 weeks so i reread all the documentation to make sure i have everything correctly configured.  Second time around in reading the oracle agent documentation...

f1shboy by Level 2
  • 377 Views
  • 3 replies
  • 0 kudos

Resolved! Veritas VCS EnvFile attribute

All documentation I have found says that the EnvFile attribute is sourced using the login shell of User.  I need to understand that, for example, if the User's login shell is set to /bin/bash, will bash load the /etc/profile? Thank you!

Resolved! disks not visible after reboot

All, We just finish to configure our cluster: SFHA5.1SP1RP1RHEL5IO Fencing (vxfentsthw validated) and we see this issue : a service group with a DiskGroup agent is online on system B and offline on system A. (System A has already owned the service gr...

Resolved! How does the oracle agent work under VCS 5.1SP1RP1

I'm currently running Oracle in Solaris zones in a clustered environment, however it seems that the agent may not be zone aware. All I'm trying to do  implement is simple process monitoring for Oracle however it seems that the agent can't find dbhome...

VCS 5.0.1 HPUX. LVM vg import

Hello, I would like to create a LVM resource in VCS that could import a LVM Volume group under HP-UX. Indeed, we are creating EVA snapclone that we need to import and to mount to make a backup. It appears that if you do the step manually, you would h...