cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Automatic Failover

I would like to use Veritas Cluster Server to achieve high availability and automatic fail over for my applications.   These application are java applications with some services with the backend databases using Sybase   The java applications can ...

haditeo by Level 2
  • 748 Views
  • 1 replies
  • 0 kudos

Resolved! Replacing node

hi, I am using VCS on two node cluster having OS Solaris 10 Sparc. One primary node is having 13 CPU, 52 GB RAM and secondary node is having 4 CPU, 20 GB RAM. In case of primary node failure, secondary node is unable to handle the load. So we want ...

Resolved! VCS 6.2 Agents for Adabas and MariaDB

Hi colleagues, For a customer I have to integrate two seperate databases into VCS 6.2 running on Oracle Linux. However I have no experience with both of them. And I could not find anything on SORT. Could someone point me to the right direction rega...

sanderfiers by Level 3
Partner Accredited
  • 769 Views
  • 2 replies
  • 0 kudos

Resolved! HAD unregistration problem with gab (failed) : VCS 6.0

Dear Team, I'm a newbi here.  We have a VCS setup on two linux (6.4) nodes (SFCFSHA 6.0). When customer tried to reboot a master node, the following error messages (confirming that HAD has unregistered with VCS (retry 1) FAILED) appeared on iLOM an...

Resolved! Integrating SAP with VCS 6.2 (on Oracle Linux 6.5)

Hi, I was wondering if someone has some additional information regarding how to setup my cluster... I have both VCS (inclusing Storage Foundation) and Linux knowledge. I do however have no background in SAP. And as SAP is a very complex product, I...

sanderfiers by Level 3
Partner Accredited
  • 1592 Views
  • 9 replies
  • 2 kudos

Resolved! how LLT heartbeat setting MAC address ?

I was able to set the MAC addressin LLT , but its getting changed after every server reboot,   Node A  # lltstat -nvv | head -10 LLT node information:     Node                 State    Link  Status  Address    *  0 node a            OPEN      ...

Resolved! IP agent for same mac address interface

Hi all, Our environment as the following: OS: redhat 6.5 VCS: VCS 6.2.1 Our server have two physical network port, namely eth0 and eth1. We do create tagged vlan, vlan515, vlan516, vlan518, vlan520 based on eth0 and eth1. We are able to create ...

Xentar by Level 4
  • 3892 Views
  • 22 replies
  • 0 kudos

Resolved! SFHA "In-Family" Upgrade ?

While discussing options to upgrade SFHA cluster (standard, phased, rolling), the topic of  "In-Family" upgrade was mentioned. I have never heard of this, so want to ask if anyone has experience with In-Family upgrade ? The concept is that In-Family...

Haniwa by Level 4
Partner Accredited Certified
  • 770 Views
  • 2 replies
  • 0 kudos

Resolved! Listener resource remain faulted

Hello,   we are doing some failure tests for a customer. We have VCS 6.2 running on solaris 10. We have an Oracle database and of course the listener associated with it. We try to simulate different kind of failures. One of them is to kill the lis...

Resolved! vxfen module cause system panic after I/O fencing

I have a three-node cluster configuration: vcs1, vcs2, vcs3.  Using three ISCSI disks (by SCST iscsi target simulator) as fendg.  # vxfenadm   -d I/O Fencing Cluster Information: ================================  Fencing Protocol Version: 201  F...

Resolved! Unable to bring the Service Group online.

Hi All, I tried to bring a SG online in a node but it's not comming online. Let me explaing the issue.   We did reboot of a node aixprd001 and we found that /etc/filesystem is corrupted so the SG bosinit_SG is in partial state since lot of cluster...

Resolved! SG is not switching to next node.

Hi All, I am new to VCS but good in HACMP.   In our environment we are using VCS-6.0, I one server we found that the SG is not moving from one node to another node when we tried manual failover using the bellow command. hagrp -switch <SGnamg> -t...

Resolved! How to configure a VCS cluster with a roaming spare?

Hello all! We are looking to add some capacity (2 more servers) to an existing VCS cluster. One server will be for growth; the other new server will be our new N+1 or roaming spare. How do I configure VCS to keep that N+1 node "dark" except in the e...

Resolved! Maintenance Pack for SFHA 6.1?

Hi @all, I'm not able to find the download area to look for if there are Maintenance Packs for SFHA 6.1. Can anybody give me the correct link? Thanks! Heinz