cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! IO fencing in VCS

Hello folks ,      Is there any way to disable the IO Fencing in VCS 5.1 Cluster without bringing the cluster down. I have a cluster consisting of 8 nodes , when I tried to add another node , Problems happened and the Fencing keys got corrupted. Ther...

Leed_Engineer by Level 4
Partner Accredited Certified
  • 865 Views
  • 6 replies
  • 1 kudos

Resolved! Is it recommended to configure coordinator DG for failover SG

Dears , Is it mandatory or recommended to implment IO fencing using co-ordinator disks if i have only failover service group with non-shared disk groups ? disk headers will have the info. "on which node it's imported" and DG is  not shared ..

hytham_fekry by Level 4
Partner Accredited Certified
  • 560 Views
  • 4 replies
  • 2 kudos

Resolved! Upgrade Linux Kernel on VCS installed

Hi all, How i can update\upgrade linux kernel on my system, with VCS installed to the target system? I update 2.6.32-71.el6.x86_64 to 2.6.32-279.el6.x86_64, but i have old kernel modules.... ------------------------------------------ ls /etc/vx/kerne...

sirin_zarin by Level 4
Partner Accredited
  • 3966 Views
  • 6 replies
  • 1 kudos

Resolved! SQL memory management in active/active configuration

Hi, I will have 4 nodes in an active/active/active/active configuration.  Each node will have 3 SQL instances installed on it.  Each node has 256GB RAM.  I know I can set the limit each instance can use, but the more memory SQL gets, the better it ru...

scogeb by Level 3
  • 1527 Views
  • 2 replies
  • 0 kudos

Resolved! VCS 5 Trial Software

Hi there We are looking for the trial software for Storage Foundation for HA version 5! On the download site it seems you can only get version 6 but the software we want to cluster is only supported for version 5. Does anybody know where we can get i...

luca_ by Level 2
  • 796 Views
  • 4 replies
  • 0 kudos

Resolved! VCS AutoStartList ungracefully failover.

I have a cluster setup and everything seems to be working as expected except in one test case of an ungraceful shutdowns. The outstanding issue seems to be with the ungraceful shutdown. At this time when it comes to an ungraceful shutdown, it seems t...

mkruer by Level 4
  • 1266 Views
  • 9 replies
  • 0 kudos

unable to create application resource

I have an issue with creating application resource in a SFHA environment. below is my configuration. In my environment a two node SFHA cluster.do not wish to let VCS take control of the database instead. a script created to start and stop the databas...

kayak_pc by Level 3
Partner Accredited Certified
  • 322 Views
  • 2 replies
  • 1 kudos

Resolved! slave node tries to access shared disks

Dear all,   I have a cluster (2xt2000) solaris 10, veritas storage foundation and veritas cluster server 5.1 sp1 rp2. although node 1 is active and owning the disks when reboot node 2 in boot log I see errors that node can not access to disks and fur...

Resolved! agent is not able to control oracle database

Dear All, I am working on 5.1sp1rp2. On my platform there is a oracle 11g2. vcs is not able to control oracle.  for example when I try to offline the database (which is started up manually) in engine_a log it says;     2000/01/13 11:07:13 VCS INFO V-...

Resolved! CVMVolDg resource fails most of the time after a timeout.

I've 2 * 2 node clusters (RHEL 6.2), one production, the other qa, which only share the same 2 separate VLAN's for their interconnect. SFCFSHA 6.0RP1 is installed. LLT and GAB have a correct status. Data disks and fencing disks are not shared between...

Karel_Bollen by Level 3
Partner Accredited
  • 435 Views
  • 2 replies
  • 0 kudos

VCS ERROR V-16-2-13067 SERVER01 Agent is calling clean for resource because the resource became OFFLINE unexpectedly, on its own.

Hi,, I have 8 nodes Veritas cluster running on RHEL 5.5 in which we are using Firedrill resources. For some time now FireDrill resources faulted everyday with below error.   LOGS:   2011/01/21 20:38:06 VCS INFO V-16-20054-101 SERVER01 MirrorViewSnap:...

Resolved! pause between one resource and another

Hey All, I am looking for a solution to the following problem. I have a group conrolling Sybase dataserver instance which starts resources in the following order 1) disk group 2) ip and volumes 3) mount points 4) dataserver 5) backupserver Thing is t...

bazi by Level 3
  • 739 Views
  • 8 replies
  • 0 kudos

Resolved! VCS 5.1 SP1, Netbackup 7.1.0.2 & Linux RHEL 5.6

Hi All,   I am new to this forum. Need your help with one of the issues i m facingat a customer site. I am having a setup of 3 clustered nodes. 2 cluster at one location & 1 cluster at a remote location. The failover between the 2 nodes is a normal f...

Resolved! VCS does not notice SAN LUN disappearance

We have a cluster running on two Oracle M3000 with Solaris 10 Update 9 and VCS 5.1 SP1RP2.  Some more information on the cluster setup: - Seven containers running as cluster resources - On each of these one Oracle 11.2 DB is running - The nodes have ...

thstettler by Level 3
Partner Accredited Certified
  • 830 Views
  • 5 replies
  • 0 kudos

Resolved! RemoteGroup Resource - MonitorOnly

I created a RemoteGroup resource last night, in VCS 5.1 SP1 RP1 on Solaris 10, to do some testing and validation.  I needed a resource which monitors a remote service group (Oracle database service group).  It doesn't need to cause the remote service...

jstucki by Level 4
  • 430 Views
  • 1 replies
  • 0 kudos

Resolved! Cannot unload GAB and LLT on RHEL 6.0

Hi all, i have next problem # lltstat -n LLT node information:     Node                 State    Links      0 srv-n1       OPEN        2    * 1 srv-n2       OPEN        2 # gabconfig -a GAB Port Memberships ==================================...

sirin_zarin by Level 4
Partner Accredited
  • 7476 Views
  • 4 replies
  • 1 kudos