cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Disk space reporting

I'm runing VCS 5.0 and have a SG with NFS shares off a RAID from the two servers in my cluster. The problem I'm running into is a conflict of how much disk space is being used with a "df" compared to a "du". One of the file systems is off by 36GB. We...

Resolved! Release date of VCS 6.1 & VCS 6.2

Hello All, I need your help to know the Release dates for VCS 6.1 & VCS 6.2 software. If anyone have any URL details for the same kindly help me out.

knbu by Level 4
  • 645 Views
  • 1 replies
  • 0 kudos

Resolved! CFS Health Check ?

Hi All, We have recently built a 4-node Oracle single-instance CFS cluster, with more to on the way. The cluster will host many databases, and all nodes will be active. The databases will migrate from non-clustered to CFS clustered servers, and we ...

Haniwa by Level 4
Partner Accredited Certified
  • 1211 Views
  • 3 replies
  • 0 kudos

Resolved! Unable to bring the Service Group online.

Hi All, I tried to bring a SG online in a node but it's not comming online. Let me explaing the issue.   We did reboot of a node aixprd001 and we found that /etc/filesystem is corrupted so the SG bosinit_SG is in partial state since lot of cluster...

Resolved! SG is not switching to next node.

Hi All, I am new to VCS but good in HACMP.   In our environment we are using VCS-6.0, I one server we found that the SG is not moving from one node to another node when we tried manual failover using the bellow command. hagrp -switch <SGnamg> -t...

Resolved! Bonding VCS

Hi, I want to reconfigure my clusters so that it runs on bonding mode. The cluster was running only running on specific eth on public facing network. But now since the servers have configured bonding using two eth interfaces, any procedure to follow ...

VMotion vs VCS

  We have a  slightly complicated question, it is, however, not really that complicated.   We are moving one of our money generating apps over to dedicated UCS blades, and in VCS, (Linux on UCS blades with VCS), there is, however, some talk of using ...

V-16-2-13027 Oracle Rac

Dears ,    Engine_A is started to be flooded with  V-16-2-13027 error code , eventually some resources fail after passing multiple failed monitoring cycle , clean is called . - PrivNIC is configured with 2 interfaces , which are the same two interfac...

hytham_fekry by Level 4
Partner Accredited Certified
  • 713 Views
  • 5 replies
  • 1 kudos

need a solution

    we have 2 node cluster and with version 5.1 we experienced outage and  I think it was due to below error messages can someone shed some light on these messages  qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE qlc: [ID 630585 kern....

symsonu by Level 6
  • 1649 Views
  • 4 replies
  • 2 kudos

Loadbalacing

HI,   I have 2 VMs that runs Server 2008 R2 Standard. I have mapped a LUN as RDM to one of the server. Is there anyway i can loadbalance or share the same drive between the servers at the same time using VRTS STORAGE FOUNDATION HA,/DR 5.1 WIN FOR OS ...

Resolved! SQL memory management in active/active configuration

Hi, I will have 4 nodes in an active/active/active/active configuration.  Each node will have 3 SQL instances installed on it.  Each node has 256GB RAM.  I know I can set the limit each instance can use, but the more memory SQL gets, the better it ru...

scogeb by Level 3
  • 1519 Views
  • 2 replies
  • 0 kudos

Resolved! oracle listener error times out

Hi All,  We are experiencing VCS warning messages saying Oracle listener resource has mied out. It has happened for few times.  But we found the system is working fine and no issue. And at the same time the CPU usage is quite high. The question here ...

raunaz by Level 4
Certified
  • 602 Views
  • 2 replies
  • 0 kudos

High Load while running VCS 5.0MP3

I have a SLES 10 server that runs very hot with VCS running.  What's weird is that if I bring up VCS, with no service groups online, the load is fine, but when I bring up all the service groups and bring them all back down, the load remains.  It will...

theplum by Level 2
  • 572 Views
  • 5 replies
  • 0 kudos

VCS 5.1 and Informix 7.31

We have upgraded to VCS 5.1 recently and use the 5.1 Informix agent to monitor our DB. Since the upgrade the DB query times have slowly crept up so we know experience performance problems. We have tested stopping the agent and the query times increas...

How VCS-5 protects the cluster online configuration.

Dear All, I'm new to VCS and going throuhg VCS4 student guide to learn VCS. I have created two node cluster in Vmware using VCS-5.0.30.00-MP3. In VCS 4, if we open the cluster configuration, VCS will create a file called ".stale" in /etc/VRTSvcs/conf...

Veeraa by Not applicable
  • 556 Views
  • 5 replies
  • 0 kudos

Resolved! VCS new volume created. Need to add up under existing Resource Group under 2 node clustered Solaris 10 Server...Important..please assist

Hi, I am newbi to VCS. OS is Solaris10. Two node cluster env. New filesystem already created and mounted with dedicated Vertual IP and is already under VCS. We have added two more Vol's (Vol03 & Vol04) in the existing Resource Group say 'node1_rg' ...