cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! unsuccessful cluster failover occured because of nic faulted

Hello,  Platform: solaris 11 Logs:  Jun 23 16:36:49 nodeA Had[5211]: [ID 702911 daemon.notice] VCS ERROR V-16-1-54031 Resource csgnic (Owner: Unspecified, Group: ClusterService) is FAULTED on sys nodeA Jun 23 16:37:49 nodeA Had[5211]: [ID 702911 ...

c0derx by Level 3
Partner
  • 2853 Views
  • 7 replies
  • 1 kudos

Resolved! MULTINICB resource faulty and not getting cleared

Hi Team,   I am seeing MultinicB  resource fault as shown below D  Ossfs           Proxy                ossfs_p1             et-coreg-admin2 D  PubLan          MultiNICB            pub_mnic             et-coreg-admin2 D  Sybase1         Proxy   ...

symsonu by Level 6
  • 1506 Views
  • 3 replies
  • 0 kudos

cfsmount1 &cfsmount2 resource could not offline

I met a problem about vcs.   Environment: HW T5220 Server *2 + ax4-5; Problem description:   When executing “init 6” or “hastop –all” command in cluster system, resource cfsmount1&cfsmount2 could not been offline normally;   Checked with the ...

ebotang by Level 3
  • 2637 Views
  • 9 replies
  • 0 kudos

cfsmount1 &cfsmount2 resource could not offline

I met a problem about vcs.   Environment: HW T5220 Server *2 + ax4-5; SW EMM8 ICP1505     Problem description:   When executing “init 6” or “hastop –all” command in cluster system, resource cfsmount1&cfsmount2 could not been offline normally...

ebotang by Level 3
  • 478 Views
  • 1 replies
  • 1 kudos

monitoring of 2 nic resources in a global cluster

hi all. I'm using an application in a global cluster environment formed by 2 mini-cluster with one node each one, configured by a supplier. this application is using 2 NICs: one for the LAN of the management of the servers and one for the LAN of th...

tgenova by Level 4
  • 1384 Views
  • 5 replies
  • 0 kudos

Using Veritas Cluster for HA Active/Active

Hi All. In my company, we are working implementing HA to my Solaris server that use LDOMS, at this moment we have 1 server with 1 storage, the objective is to implement a second server and storage. I would like to have your recommendations about th...

Errors in dmpevent.log file

Hi ,     I am seeing below errror messages in dmpevent.log /var/adm/vx/dmpevents.log   Mon Mar 28 11:23:27.786: SCSI error occured on Path sdv: opcode=0x5f reported reservation conflict  (status=0xc, key=0x0, asc=0x0, ascq=0x0)  Mon Mar 28 11:...

symsonu by Level 6
  • 1162 Views
  • 3 replies
  • 0 kudos

Can HAD start without I/O fencing?

I want to remove I/O fencing completely and start VCS (in test environment), but every time I fire hastart command, HAD tries to start I/O fencing driver and fails to start HAD. I have removed the registered key, disabled fencing in /etc/vxfenmode fi...

Resolved! VCS engine (had) cann't start automatically

 this is the only node of the cluster1 that I am trying to start VCS. as my experience, after SFHA installation, the veritas can start automatically with Solaris OS boot. the below is the procedure of my operation 1.after SFHA installation, I foun...

Resolved! VCS engine (had) cann't start automatically

 this is the only node of the cluster1 that I am trying to start VCS. as my experience, after SFHA installation, the veritas can start automatically with Solaris OS boot. the below is the procedure of my operation 1.after SFHA installation, I foun...

Resolved! Custom Monitoring Scripts

Greetings All..  i have a Solaris 10 cluster running VCS 5.0  and i observed an odd behaviour I have a number of APPs under VCS control and for monitoring, the ones written in ksh work fine. I have one that a developer just wrote in bash and when i...

Resolved! Check number of node supported by license

Hi all, I want to know my VCS license support how many nodes. What can I do? If I want to add more nodes, I should change license on all of the nodes?   Thanks in advance Regards,

Rahim_T by Level 3
  • 3955 Views
  • 15 replies
  • 0 kudos

Resolved! Jeopardy state Query

Hi Team,   I have a query,If I have a 2 node cluster set up( S1 -S2) and system S2 went into the state of Jeopardywhat would be the impact on the service group if a) SG has no critical resources setup b) SG has critical resource set up What woul...

Unable to boot into the OS

When trying to boot Solaris 10 server with veritas volume manager 4.0 I get the following error. NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk Oct 21 01:16:57 svc.startd[7]: svc:/system/power:default: Could not interpret user pr...

Resolved! Replacing node

hi, I am using VCS on two node cluster having OS Solaris 10 Sparc. One primary node is having 13 CPU, 52 GB RAM and secondary node is having 4 CPU, 20 GB RAM. In case of primary node failure, secondary node is unable to handle the load. So we want ...