I am seeing below errror messages in dmpevent.log /var/adm/vx/dmpevents.log
Mon Mar 28 11:23:27.786: SCSI error occured on Path sdv: opcode=0x5f reported reservation conflict
(status=0xc, key=0x0, asc=0x0, ascq=0x0)
Mon Mar 28 11:...
Please suggest, if I have 4 nodes and due to some network issue suddenly all 4 nodes down. 3 nodes came up but 1 node is not coming up.
So what would happen to vcs services.Does that run automatically or need to run it manually.
i am new to this site.
I have a two node cluster over HP DL 380 G8 server . When i use hagrp -local -evacuate on node one , the service group do not shift to node two as the veritas is unable to stop the workflow.
After network fluctuation disk group is imported on both nodes, we try to deport DG frm passive node but it showing "offlining" status only.
i think to reslove this we have to stop the VCS forecefull on passive node, but now i able to see that ...
I have a query,If I have a 2 node cluster set up( S1 -S2) and system S2 went into the state of Jeopardywhat would be the impact on the service group if
a) SG has no critical resources setup
b) SG has critical resource set up
When trying to boot Solaris 10 server with veritas volume manager 4.0 I get the following error.
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
Oct 21 01:16:57 svc.startd: svc:/system/power:default: Could not interpret user pr...
I am getting the following error when trying to online the SVCCopyService on windows, this comes up immediately there is no delay in receiving the message in the Status window.
Is it possible to bind Steward to a specific IP? The question arise after we realised in one deployment where the host with Steward has several IPs from the same network was sending Steward responses from different IP from time to time which was not ...
We have to replace DIMM on the active node in which VCS services is currently running.
Kindly guide step by step procedure for this activity,also please suggest the prerequisities before starting this activity.
This is very very crucial...
I have installed SFCFSHA cluster solution on RHEL 1.6, storage is connected through Fiber Channel Over Ethernet (FCoE) interace and dmp is used as multipathing solution.
The issue is while i reboot the system, I/O fecning got failed, ...
I am not able to configure the HA proxy with application AGENT. its not giving the status after probed completed.
Application HAPROXY (
Critical = 0
StartProgram = "/usr/src/haproxy-1.5.12/HAPROXY start...
We have 2 Storage Foundation for Oracle RAC 5.1SP1 servers running on AIX 5.3 Servers. We have Application Service Group and Database Service Group which is both active active. I encountered a problem when i initiated manual offline of the Se...
I have a global cluster formed by 2 mini-cluster of one node only each one synchronized in asynchronous mode.
I wanted to simulate a fault of primary node with solaris command 'halt'
root@MILWB02S # hagrp -state AppService
I'm runing VCS 5.0 and have a SG with NFS shares off a RAID from the two servers in my cluster. The problem I'm running into is a conflict of how much disk space is being used with a "df" compared to a "du". One of the file systems is off by 36GB. We...
May 25 03:54:10 node-02 Had: [ID 702911 daemon.notice] VCS CRITICAL V-16-1-50086 CPU usage on node-02 is 91%
May 25 03:55:09 node-02 Had: [ID 702911 daemon.notice] VCS CRITICAL V-16-1-50086 CPU usage on node-02 is 95%
May 25 04:52...
We have to replacement DIMM on the passive node in which VCS services is currently not running.The cross over cables LLT is hanged in such a way that we need to move both boxes (Active and passive nodes).It requires downtime because we ...