Hi Experts, Need help in understanding cluster of 1+1 , my master node is down due an OS issue and now the slave node should ideal takeover but i see it is not starting. Attached is the Engine.log where i can see some "ShutdownTimeout" , please let...
I originally posted this in the NetBackup forum but it seems to be a VCS issue that is the root of the problem: https://www-secure.symantec.com/connect/forums/install-clustered-master-server-greyed-out I am trying to set up a test NBU 7.6.0.1 mast...
Hi Team, Many times we face resource faults alerts on our AIX server,but when we check it shows all are running fine. Also, when checked logs it shows not (initiated by VCS) alerts. Our main concern is to troubleshoot, why we get these alerts and...
Hello Experts, We have a two node active-passive VCS 6.0 cluster running in Solaris LDOM on T4-1 servers. Two virtual interfaces (Vnet0 and Vnet1) are configured from the control domain using igb2/igb4. vnet0 and vnet1 using solaris ipmp. The clu...
Hi all, I've found a problem after create a resource to mount ext3 device. Mount dNFS_Mount ( MountPoint = "/share" BlockDevice = vg_fs_cal-lv_fs_cal FSType = ext3 ...
Hi all, I'm in the midst of planning a heartbeat switch migration and will need to iron out a few kinks. My environment consists of multiple VCS cluster groups, running on Windows 2003/2008. Apparently one of the network switch connecting all the...
After moving server to secondary site, replication has restarted and working - good - except the Icmp status between gco cluster: status Exited Icmp unknown Please Note that the distance between the 2 sites is 500km, the bandwidth is about 1.5m...
Hi I wonder why the process vbsd.bin always utilize a lot of CPU resource ( always > 10%) after I configured the VBS on it. What does it do? Is there anything I've to check? Here is a captured stat reported by topas. Thank you Supaprapat N...
Dear support Any ide about this message regarding the panic of solaris 10. regards
Hi:Everyone In my VCS HA test ENV,I face this issue after use vxdisk rm 3pardata0_0_2 commd. There are two nodes in VCS.NODE A is ok,vxdisk list result as below: NODE A(this is ok): [root@ty-mlbrep21 ~]# vxdisk list DEVICE TYPE ...
HI. I am facing some FAT and I am performing a standard reboot. I have one cluster with two nodes and another server with Coordination Point Server. When I restart one node I verify the service conmutes. The server shutdwon cleanly and startutp cle...
I have finished configured Service Group and I am going to configure GCO function! The first step is add remote cluster, however that button is always grey, I can't enable it and I can't do the following things! Hope someone can help me and give me...
Dear All, I would like to have some help to identify following error while onlining a NetApp SnapMirror agent that was intergrated with VCS. The filer name and its credential s were given properly and even i can able to ssh it from the servers but ...
Hi, Can anyone describe a method to add LUNs to a VCS-controlled VxVM diskgroup when the disks in the diskgroup are protected using SCSI-3 fencing? We tried adding LUNs to a VCS-controlled diskgroup recently and got the following error message: " VC...
Has anyone ever see NOTE or INFO message for "Mem usage" - I have only seen WARNING or CRITICAL I have check 3 systems and all have "Mem usage" messages for WARNING or CRITICAL, but not for NOTE or INFO: $ grep "Mem usage" engine_*.log | egrep "W...
I am getting messages: VCS WARNING V-16-1-17031 Notifier:activated signal 6 VCS WARNING V-16-1-17051 Notifier:Unable to connect to localhost VCS WARNING V-16-1-17036 Notifier:SMTP error 17051 in notifier-out_A.log and VCS is not sending email not...
Hi I've a problem with iSCSI and VCS. Basically the problem is for RHEL. As you know when you reboot a system that uses iSCSI usually the name of the devices is always changing, (/dev/sdf to /dev/sdm) so I found a way to solve this issue with UUID (...
Hi All, I want to add new node in existing 3 node cluster without disturbing the service. Can you please let me know the steps ? Thanks Vel
Hi Gaurav, I wish to verify with you troubleshooting things. An service group could failover onto other node because the curent running node is heavy loaded?If yes how i could see that this is the reason?Any clue on engine_A.log?Then cpus load more...
Hi, I have seen this error at Solaris log and I want to discover why this is happening: Jun 30 19:07:07 dp-node9 llt: [ID 216203 kern.notice] LLT WARNING V-14-1-10498 recvarpack cross links? links 0 and 1 saw the same peer link number 1 for node 1 ...
