cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Veritas Cluster

I need to know the licensing method if i am planning to run 4 Node Window cluster  on Virtual machine. 1) Physical Machine having Dual CPU with 12 core ( Intel Xeon E5). 2) Virtual Machine having 16 vcpu each . So need to understand how many licen...

Resolved! Process Agent

Hi all, I have configured SQL service group. I need a restart 1C application server after failover accours. For this purpose I will use script. The script will done 1 time after service group become online. I think process agent can help me. For t...

Resolved! how LLT heartbeat setting MAC address ?

I was able to set the MAC addressin LLT , but its getting changed after every server reboot,   Node A  # lltstat -nvv | head -10 LLT node information:     Node                 State    Link  Status  Address    *  0 node a            OPEN      ...

Resolved! cannot fit into memory

Hi, we were using Symantec Storage Foundation  6.0 on RHEL 6.4 , which is working fine. After upgrading Symantec Storage Foundation  6.2 , its hanging on console with “Error 28  selected item cannot fit into memory” any idea what could be the rea...

SanmanInd by Not applicable
  • 517 Views
  • 1 replies
  • 0 kudos

VMotion vs VCS

  We have a  slightly complicated question, it is, however, not really that complicated.   We are moving one of our money generating apps over to dedicated UCS blades, and in VCS, (Linux on UCS blades with VCS), there is, however, some talk of using ...

Resolved! Network setup for VMware and VCS

Hi, I am trying to set up a cluster consisting of four VMware VMs. I am still having problems finding how to set up the network connections for these systems. I have read that we need vNetwork Distributed Switches for this. Is that correct? We are i...

thstettler by Level 3
Partner Accredited Certified
  • 460 Views
  • 5 replies
  • 0 kudos

New LUN not visible to Veritas Cluster Nodes

Hi, I have two node Veritas Cluster and I have requested 3 more LUN in existing Cluster.. All 3 are attached, but 1 is already assigned to a group (not sure how it is created ) now I need to remove the disk so that its available as the other 2 t...

sidsan by Not applicable
  • 272 Views
  • 1 replies
  • 0 kudos

Loadbalacing

HI,   I have 2 VMs that runs Server 2008 R2 Standard. I have mapped a LUN as RDM to one of the server. Is there anyway i can loadbalance or share the same drive between the servers at the same time using VRTS STORAGE FOUNDATION HA,/DR 5.1 WIN FOR OS ...

Resolved! setting up a vm-vm 2-node cluster in Oracle VM environment

I'm trying to set up a vm-vm 2-node cluster in Oracle VM environment using Oracle Sparc T3-2 server. The two VMs (LDoms) are on the same physical server. Both nodes have SFHA installed, and ready for cluster configuration. But before I can do the clu...

Resolved! Oracle RAC 9iR2 in Solaris 9 branded zone

Hello, Reading through the VCS sfha 5.1sp1 Virtualization guide chapter 3 states that Oracle 9iR2 is supported in Solaris 9 branded zones. Does anybody know if this includes Oracle 9iR2 RAC running across two Solaris 9 branded zones on cvm/cfs. If th...

cdek by Level 2
  • 670 Views
  • 4 replies
  • 0 kudos

Resolved! VCS on Windows and Red Hat

Hi All, I am facing a new challenge with Veritas Cluster Server. In the past I only use VCS on Solaris boxes and for a new project I have to design a HA solution for Red Hat and Windows Hosts. Those hosts are mostly virtualized (40:60 P/V) and are di...

_14 by Level 2
Partner Accredited
  • 508 Views
  • 3 replies
  • 0 kudos

Resolved! Sync users on cluster nodes and solaris zones?

We're implementing a 4 node VCS cluster (Sun servers) with multiple solaris zones in operation within the various service groups. The zones will failover from node to node as required under the control of VCS. Are there any recommended utilities or b...

ant_oco by Level 2
  • 402 Views
  • 3 replies
  • 0 kudos

Resolved! VCS 5.1 (SP2) and ESX 4.1 (Update 1) Compatibility

Howdy, Unless I am mistaken, the latest revision of the SCL for VCS 5.1 (SP2) does not explicitly state that ESX 4.1 (Update 1) is compatible. It only lists 4.1 While I'm near certain that it is compatible, I'd like to know if anyone has info on this...

wandarah by Level 5
Partner Accredited
  • 269 Views
  • 2 replies
  • 0 kudos