cancel
Showing results for 
Search instead for 
Did you mean: 
Dynamic Multi-Pathing and Dynamic Multi-Pathing for VMware
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Unable to boot RHEL 6.3 server after installing DMP 5.1 SP1 RP2

Dear Gents, I have recently installed DMP 5.1 SP1 RP2 on a rhel 6.3 os x86_64, after the installation when i took a reboot the system got hung during the boot time. i found the follwoing error message from teh console. "this release of vxted doesno...

uvahpux by Level 4
Partner
  • 3841 Views
  • 3 replies
  • 0 kudos

Resolved! Hostmode setting on SunSTK 6180 after upgrade no longer supported

Goodafternoon, We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge : Solaris Issues Solaris with Veritas DMP or other...

Resolved! Why does 1 subpath in multipathing use slice 2 and not the other??

  Wondering why disk 2 show slice 2 whereas the other subpaths show only disk?  Does this mean that this disk has been formatted/labeled differently? They all should be labeled EFI.    [2250]$ vxdisk path SUBPATH                     DANAME           ...

Resolved! Couple of questions

Hi, Q1. Please refer to the following message, this message appeared when a device path under DMP control came back online:  NOTICE: VxVM vxdmp V-5-0-148 enabled path 118/0x60 belonging to the dmpnode 322/0x18 I can find the dmpnode - "322/0x18" by l...

mrrout by Level 4
  • 1137 Views
  • 1 replies
  • 0 kudos