The dmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error
Veritas Dynamic Multi-Pathing Startup did not complete successfully
vxdmp failed to start on ddci-oml1
vxio failed to start on ddci-oml1
We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge :
Solaris with Veritas DMP or other...
I'm using SFRAC 6.0.3 on Oracle Linux 5.8 with Oracle storage (2 HBA cards, 4 paths) and would like to make the DMP subpaths persistent after rebooting.
I knew that for single path I can write the following udev rule:
Ok, I'm somewhat confused and the more I read the more confused I think I'm getting.
I'm going to be setting up a 4 node active/active cluster for SQL. All of the nodes will have 2 seperate fiber channel HBAs connecting through 2 seperate switches t...
Wondering why disk 2 show slice 2 whereas the other subpaths show only disk?
Does this mean that this disk has been formatted/labeled differently? They all should be labeled EFI.
$ vxdisk path
SUBPATH DANAME ...
just to understand the way DMP manages devices. We want to use DMP devices inside zpools. So I enabled the dmp_native_support and disabled the MPxIO. Everything seems to work the right way. However in the format (solaris 10) I see dmp devices...
I'm new in Storage foundation and Veritas volume manager,
I need help how to configure Veritas Dynamic Multipathing on VCS 5.1 installed on two node running OS linux 5.3 I have following Disk, I want to enable Veritas to manage two disk disk_...