Under Server 2003 Disk Management, "extend volume" and "shrink volume" are greyed out. There are 4 SATA drives that create 2 partitions... 12GB and 211GB
The 12 GB partition holds the OS, but requires more space. If I UN-Span these volumes, will ...
I am trying to setup multipathing with EMC Clariion. The problem is that vxdisk list fabric_0 only shows one path. The EMC array is in auto-trespass mode. This is solaris 8 and format shows two paths.
# vxdisk list fabric_2
I have a setup that I need to 'fix'...
Currently it appears the servers have RDAC/MPP as the primary multipathing , however for what ever reason, it also has Veritas Volume Manager sitting atop of this!
MPP is dealing with the pathing and prese...
We are running ORACLE RAC + ASM on RHEL.
we are using VXDMP for RAW disk.
we have an issue with ASM disk access for Oracle RAC. On startup, ASM auto-discovers its disks. Due to the way multipathing is setup on these servers (relying ...
Can't find a solution to your issue on the forums? Here's a blog post from Support with everything you'll need to know to open a Technical Support case: http://www.symantec.com/connect/blogs/opening-technical-support-case
I'm new in Storage foundation and Veritas volume manager,
I need help how to configure Veritas Dynamic Multipathing on VCS 5.1 installed on two node running OS linux 5.3 I have following Disk, I want to enable Veritas to manage two disk disk_...
How do i identify the disk device from their VxDMP id.
for e.g., "VxDMP48" is associated with which disk/LUN.
I need this information to troubleshoot below error.
"kernel: Buffer I/O error on device VxDMP48, logical block 1"
Welcome to the new Dynamic Multi-Pathing forum. To find out more information about this newly-released product, check out the release blog at:
New Release: Veritas Dynamic Multi-Pathing 5.1 for Windows
Release Type: Major Release
Veritas Dynamic Multi-Pathing 5.1 for Windows
• Windows Server 2003 SP2 (x86): Web Edition
• Windows Server 2003 SP2 (x86, x64, IA64): Standard, Enterprise, Datacenter Editions
• Windows Serv...
Hi, Got a bit of a funny on a number of servers after a misconfiguration as part of a SAN migration where a cable was incorrectly plugged, removed, and then plugged in where it was supposed to be. All servers are running Solaris 10 with Storage Found...
OS: SLES11 x86_64 SAN boot
I installed Storage Foundation 5.1 on SAN Boot SLES11 and then encapsulated the root Disk by vxdiskadm so that dmp can be used by sda (OS LUN).
After that, I installed and configured ...
I'm configuring the SFHA. I assigned some LUNS from storage to my two hosts. But I found in /dev/vx/dmp, the disks's sequence are not same.
For example :
arcx3455gbxv5:/sys/class/scsi_host/host2 # vxfenadm -i /dev/vx/dmp/san_...
I am currently working in a project using VxVM. The dmp is enabled for Mutlipath. However, when I type 'format' in command prompt.
Searching for disks...
The current rpm value 0 is invalid, adjusting it to 3600
The current rpm value 0 is invalid...
does symantec has a tool or a script to check if Multipathing is configured correctly ..and if all the disks are multipathed via DMP.
if someone has a script , they they can share?
thanks in advance..
I have a lock contention on my (E6900) solaris-9 server, that brought my server to kneese. Found that "dmp_rel_exclusive_lock" of VxVM was the one that consumes all the server CPU resources.
Since I did not know the right solution to tackle this ...
I have a customer who installed HDLM along with Storage Foundation 5 on a Solaris 10 server. Not surprisingly, they had issues. Now they want to keep HDLM and Volume Manager but disable DMP. While I do not agree with this approach, I've been given...
I'm having difficulties understading paths on Linux where DMP is installed. The server is attached to SAN (EMC Symmetrix).
For HPUX/AIX/Solaris, I remember that a cXtYdZ path both in the native form (/dev/rdsk) and in DMP form (/dev/vzx/rdmp)...