The dmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error
Veritas Dynamic Multi-Pathing Startup did not complete successfully
vxdmp failed to start on ddci-oml1
vxio failed to start on ddci-oml1
I have an question on scsi alua handler and VxDMP on Linux.
we have a scsi_dh_alua handler on linux, which can handle the ALUA related check conditions sent from target controllers. so this will be handled by scsi layer itself and will not be ...
I have recently installed DMP 5.1 SP1 RP2 on a rhel 6.3 os x86_64, after the installation when i took a reboot the system got hung during the boot time. i found the follwoing error message from teh console.
"this release of vxted doesno...
I'm using SFRAC 6.0.3 on Oracle Linux 5.8 with Oracle storage (2 HBA cards, 4 paths) and would like to make the DMP subpaths persistent after rebooting.
I knew that for single path I can write the following udev rule:
I recently recrated a LUN with a different size but the same LUN ID (Linux SLES11) and when trying to initialize it as a new disk to VxVM I keeps sticking to the old size, whatever I do (I tried to destroy and reinitialize in different formats and g...