Goodafternoon, We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge : Solaris Issues Solaris with Veritas DMP or other...
Goodmorning, I have issue that I can't seem to solve and I'm dire need of assistance. I have veritas cluster 5.1 running on solaris 10 connected to an 6180 storage array. The array is directly connected to 2 hotsts. (no switch!). Controller port 1A i...
We are going to change the DMP IOPOLICY for our IBM XIV storage from Balanced to Round-Robin. We are also going to set use_all_path=yes. Do these commands require a reboot (Solaris). I checked the VXVM Admin guide and can't see anything about this...
I am trying to setup multipathing with EMC Clariion. The problem is that vxdisk list fabric_0 only shows one path. The EMC array is in auto-trespass mode. This is solaris 8 and format shows two paths. # vxdisk list fabric_2 Device: fabric_2...
I am currently working in a project using VxVM. The dmp is enabled for Mutlipath. However, when I type 'format' in command prompt. Searching for disks... The current rpm value 0 is invalid, adjusting it to 3600 The current rpm value 0 is invalid...
I have a customer who installed HDLM along with Storage Foundation 5 on a Solaris 10 server. Not surprisingly, they had issues. Now they want to keep HDLM and Volume Manager but disable DMP. While I do not agree with this approach, I've been given...
