Goodmorning, I have issue that I can't seem to solve and I'm dire need of assistance. I have veritas cluster 5.1 running on solaris 10 connected to an 6180 storage array. The array is directly connected to 2 hotsts. (no switch!). Controller port 1A i...
Hi experts, I'm using SFRAC 6.0.3 on Oracle Linux 5.8 with Oracle storage (2 HBA cards, 4 paths) and would like to make the DMP subpaths persistent after rebooting. I knew that for single path I can write the following udev rule: KERNEL=="sd*", BUS==...
Ok, I'm somewhat confused and the more I read the more confused I think I'm getting. I'm going to be setting up a 4 node active/active cluster for SQL. All of the nodes will have 2 seperate fiber channel HBAs connecting through 2 seperate switches t...
What is the recommended setting for the Load Balance Policy for a SQL environment? Or, where can I find more information about the available settings? Thanks!
Under Server 2003 Disk Management, "extend volume" and "shrink volume" are greyed out. There are 4 SATA drives that create 2 partitions... 12GB and 211GB The 12 GB partition holds the OS, but requires more space. If I UN-Span these volumes, will ...
I am currently working in a project using VxVM. The dmp is enabled for Mutlipath. However, when I type 'format' in command prompt. Searching for disks... The current rpm value 0 is invalid, adjusting it to 3600 The current rpm value 0 is invalid...
I have a customer who installed HDLM along with Storage Foundation 5 on a Solaris 10 server. Not surprisingly, they had issues. Now they want to keep HDLM and Volume Manager but disable DMP. While I do not agree with this approach, I've been given...
