I am very new to veritas. We have AIX 7.1 server using veritas DMP. When I look at the VIO all of the virtual fibre channel adapters are logged in, but on the lpar it is failing to see any disks on fscsi0 and fscsi1. I have been going back and forth ...
Hi, I have an question on scsi alua handler and VxDMP on Linux. we have a scsi_dh_alua handler on linux, which can handle the ALUA related check conditions sent from target controllers. so this will be handled by scsi layer itself and will not be ...
Goodafternoon, We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge : Solaris Issues Solaris with Veritas DMP or other...
Goodmorning, I have issue that I can't seem to solve and I'm dire need of assistance. I have veritas cluster 5.1 running on solaris 10 connected to an 6180 storage array. The array is directly connected to 2 hotsts. (no switch!). Controller port 1A i...
This is more like an informational question, since I do not assume anyone has a solution, but just in case I would be thankfull for some enlightment: I am forced to use an old Version SF4.1MP4 in this case on Linux SLES9. For whatever reason DMP does...
I recently recrated a LUN with a different size but the same LUN ID (Linux SLES11) and when trying to initialize it as a new disk to VxVM I keeps sticking to the old size, whatever I do (I tried to destroy and reinitialize in different formats and g...
Can't find a solution to your issue on the forums? Here's a blog post from Support with everything you'll need to know to open a Technical Support case: http://www.symantec.com/connect/blogs/opening-technical-support-case
