cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Replication from second copy

Hi guys, My enviroment has 6 5230 appliance, appliance 1 and appliance 2 are working for backups, appliance 3 and appliance 4 are woriking for replications only, and appliance 5 and appliance 6 are replications targets.   I create a SLP like this,...

AndresV by VIP
Partner    VIP   
  • 601 Views
  • 2 replies
  • 0 kudos

Resolved! 5230 - Cannot Start NBFSD following 2.7.2 upgrade

I have a number of 5230 appliances, each configured as Master / Media servers accross a number of sites. I have just upgraded each of the appliances to 2.7.2, and all appears well excepting the Exchange GRT backups.  I haven't upgraded any clients a...

SYMAJ by Level 6
Partner Accredited
  • 3159 Views
  • 2 replies
  • 0 kudos

Netbackup 5230 CIFS Share Permissions issue

We recently have had issues copying any software updates to the software share. I open the share via the CLISH - Manage>Software>Share Open. Then map a drive to \\nbappliance\incoming_patches using the appliance admin credentials. However, when tryin...

protect backups from ransomware

i work for a hospital and there are quite a few hospitals that have been attacked by ransomware. In some of these attacks , they encrypted the live data as well as the backups.  I am wondering how protected is our backups that reside on the MSDP pool...

sjvz by Level 3
  • 1484 Views
  • 3 replies
  • 0 kudos

Wipe clean appliance?

Hello, anyone knowns if there is a way to completely wipe clean an appliance, I mean totallly. Not like FactoryReset or ReImage, thats doesn't clean it.

Even by Level 5
Partner Accredited
  • 905 Views
  • 4 replies
  • 0 kudos

Housekeeping track logs from Accelerator NDMP backups

I have been building a new NetBackup implementation to backup an NetApp Filer which uses a 5230 appliance as the Master Server and two large Windows based Media Servers. The appliance was shipped in Dec 2015 and I have upgraded it to v2.7.1 specifica...

Dawsie by Level 3
Partner Accredited
  • 833 Views
  • 1 replies
  • 0 kudos

Resolved! Netbackup Appliance Password reset

Hi, We need to reset default Appliance 5230 "admin" account password. Both for CLISH & WEBGui. Current password : p@ssw0rd (we would like to reset this) Hope someone can suggest.

Dgo by Level 4
  • 2140 Views
  • 1 replies
  • 0 kudos

IBM AIX PowerVM and Appliance

  We are considering replacing our tape library with an Appliance, 5230. We have multiple IBM Power servers (P770, E870) with 100+ AIX clients. Each currently has a media server which is SAN attached to the tape library. The AIX clients on the same...

psvines by Level 3
  • 1307 Views
  • 8 replies
  • 0 kudos

Resolved! Migrate existing setup to new appliance

Hello , we are considering the appliance solution and have the following two question ;   Currently we have a NetBackup 7.1 running on a server how can we migrate it to the appliance ?How can I have an HA , can we implement a HA like having a clust...

Joe_ab by Level 4
  • 497 Views
  • 2 replies
  • 0 kudos

Resolved! Tape is FULL

Hi,  I'm an IT Specialist and just new to Symantec Netbackup. I'm running 7.6.1.2. I have several tapes that were reported by Netbackup as Full. I want to remove these tapes from the library. What command should I need to run so that netbackup wil...

knowles by Level 1
  • 427 Views
  • 1 replies
  • 0 kudos

Resolved! Orphaned images on an Appliance

Hi All Problem MSDP Pool using more space than expected Problem 1 isolated : Orphaned Image Fragments , need solution   Background Netbackup Appliance Currently on 2.7.1 Environment used to have major problems with AIR replication , cause wa...

Resolved! Adding NTP server to Date/time page

Hi    Our appliance 5230, @2.6.0.3 in media server role is running fine. I checked its callhome service is not running, as NTP server entry is not added to it like our other appliance. My query is if I add NTP server to its configuration from web...

NBU35 by Level 6
  • 1441 Views
  • 2 replies
  • 1 kudos

NetBackup Appliance CallHome fails after upgrade to 2.6.1.2

Having just completed a NetBackup Upgrade on 2 x 5230 Appliance (Previous version is 2.6.0.3 and target version is 2.6.1.2) we've noticed the call home feature no longer works - it was working ok prior to the upgrade. We receive an error when trying...

CadenL by Moderator
Partner    VIP    Accredited Certified
  • 410 Views
  • 3 replies
  • 0 kudos

Resolved! Netabckup Appliance 5200 not responding during upgrade

Hi all,   I had a problem during upgrade, its been 18 Hours and it still stop on the same state of upgrade Veritas Optimzed Operating System 1 after do starting up vxconfigbackupd. Below was the pic of the proses upgrade. Thanks All for your help

dicky_23 by Level 3
Partner Accredited Certified
  • 494 Views
  • 1 replies
  • 0 kudos

Resolved! Clean up of /inst/client/.packages directory??

Doing a bit of housecleaning prior to upgrades... and I notice my master appliance (2.6.0.4) is probably a bit too full in the /inst filesystem to attempt an upgrade.  I look into it and see quite a few old client directories: <master>:/inst/client/...

elanmbx by Level 6
  • 836 Views
  • 6 replies
  • 1 kudos
Labels