Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
Can we connect Netbackup 5000 series appliance to multiple media servers? Can I create multiple disk pools on a single appliance? While creating disk pools in Netbackup admin console, there is an option to "use the media servers mentioned below" wh...
Hi, Env: N5230 v2.6.0.3 (soon to be patched to v2.6.0.4). Is it possible to specify a port number for SMTP authenticated emails? I know classic SMTP uses port 25, and I understand that typically email admins like to have SMTP authentication for e...
Hi Support, Please I need your urgent assistance. I am setting up a new NetBackup environment with two NBU 5230 appliances. 1x5230 will serve as the Master/Media server and the other 1x5230 will serve as Media server. The customer provided a priva...
Hi, Does anyone bother? Ever tried it? Had any issues? Thanks.
I've got a problem with seedutil command on NB 5230 appliance with NB 7.6.0.4. We would like to optimize first backup of WAN clients but seedutil returns "Error: PdvfsMount failed: Invalid argument". I tested in on my lab environment with NB 7.6.0.4 ...
Hello, I have a very strange problem over here where one of my servers does something abnormal... Once I reboot the server and run the backup (full) then I get full speed over 600Mbit/sec meaning it gets done in about 6 hours. However once the back...
Hi Support, Kindly advice me because I'm a bit confused. I am about to configure AIR between two NetBackup domains, domainA has 1xNBU5230 plus 1x5030 disk shelf, and domainB has 1xNBU5230 plus 1x5030 disk shelf. Also both NetBackup domain will be b...
Hi All, After adding a new disk shelf to a appliance and assigning the disks to the appliance , Now i have two pools/volumes one is CATALOG and another is DATA if i add disks to my appliance will my disks automatically goes to a volume/pool or i ca...
Hi everyone, We've recently installed a few 5230's (2.6.0.4) and I'm trying to configure a SAN Client to it. I've successfully done this with a couple of Windows servers so far but AIX (6.1) is giving me trouble. The client was a Media Server s...
5230 with 7.6.0.4, I have a Advanced DP that I want to put my catalog DR file on. How do I find the path in SSH to create a folder? Thanks Pat
Hello All, How to check Ping, Telnet, Bptestbpcd commands in Netbackup appliances commandline. Thanks
Hi, We've recently purchased six 5230's and while we've moved a lot of client jobs to these units successfully we need to focus on our current standalone media servers (Windows & AIX) and Microsoft clusters still running to VTL. Our master servers ...
I have just installed a new 5230 appliance which shipped with 2603 installed. After initial configuration I upgraded the appliance to 261 which completed successfully in approximately 1 hour (MSDP pool only contained a couple of test backups). Duri...
Which Network interface will the 5230 appliance attempt to use when performing the call-home function ? For example, if I have a 5230 configured with IPMI port attached to my management network, 2 x 10GbE interfaces attached in a failover mode to my...
I understand that appliance call home needs access to: http:// www.symappmon.com ...and this tech note describes how to troubleshoot Call Home: http://www.symantec.com/business/support/index?page=content&id=TECH152748 A couple of questions if ...
Hi is there a command I can run on the the netbackup appliance to view all the wwn's for ESX luns presented to the backup host appliance?
Hi Experts, I want to add a disk shelf to our exisiting NBU appliance setup, Can help me with any documentation or any old post with images. Thanks, Nayab
I just added in a new 5230 media server to replace an old 5200 and im having trouble figuring out how to migrate the two tape libraries over to it. Does any one know of a way to change the ownership of the robots so that the 5230 has control? Im no...
How should we check the Configuration of the OS installed on Netbackup appliance or is there any other way of checking the Netbackup version, Installation path
Hi All, I have a Netbackup 5230 appliance 2.6.0.2 with 4x1Gb network port. I need to use eth0 for initial configuration. So I will bond rest of the network ports. Can I include eth0 to bond, after initial configuration? Regards