Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
N5230 v2.6.0.3 - new build I have the choice of upgrading: a) From v2.6.0.3 to v2.6.1 to v2.6.1.1... which will allow a downgrade to v2.6.1, if issues are experienced. ...or: b) From v2.6.0.3 direct to v2.6.1.1... which will NOT allow a downgrade...
N5230 v2.6.0.3 Settings > Alerts > Callhome Registration... ...is it best to specify: a) The address of the 'owner' of the hardware. ...or: b) The address of the 'physical location' of the the hardware. Thanks.
I have the following upgrade scenario with NBU and 5220 appliances, and am wondering how much of this I can perform concurrently. Windows 2008R2 Master Server - recently upgraded to NBU 7611 - all OK 5220 Media Server 1 (72TB) - 2.5.3 5220 Medi...
Hi All, I have admin access to my NBU appliance but not the root access , Could anybody help me with how to enable ROOT SSH access ? I have tried searching WEB for it but i found no proper procedure to do . Thanks, Nayab
(Crossposted from the Netting out NetBackup blog) I'm very pleased to announce that the next Release Updates for Deduplication Appliances is now available! NetBackup 5000/5020/5030 Deduplication Appliances 1.4.5 is the latest patch release and can ...
(crossposted from the Netting Out NetBackup blog) I’m extremely happy to announce that NetBackup Appliances 2.6.1.1 is now Generally Available! NetBackup Appliances 2.6.1.1 is the latest update for NetBackup 52xx (and 5330!) Applainces and the equi...
Appliance 5230, v2.6.0.3, master/media, already fully configured. My question: is it safe to follow this procedure: https://www-secure.symantec.com/connect/forums/ipmi-does-not-work ...on an already fully configured master/media appliance (runnin...
Hi Support, Please I need your urgent assistance. I am setting up a new NetBackup environment with two NBU 5230 appliances. 1x5230 will serve as the Master/Media server and the other 1x5230 will serve as Media server. The customer provided a priva...
We have Two 5230 Appliance at Production site as one Master and one Media role. Similarly two at DR site with one Master, one Media role. We want to setup AIR between Production and DR between appliance. Then we want to take the backup of Esxi serv...
Hi All, After adding a new disk shelf to a appliance and assigning the disks to the appliance , Now i have two pools/volumes one is CATALOG and another is DATA if i add disks to my appliance will my disks automatically goes to a volume/pool or i ca...
I have just installed a new 5230 appliance which shipped with 2603 installed. After initial configuration I upgraded the appliance to 261 which completed successfully in approximately 1 hour (MSDP pool only contained a couple of test backups). Duri...
Which Network interface will the 5230 appliance attempt to use when performing the call-home function ? For example, if I have a 5230 configured with IPMI port attached to my management network, 2 x 10GbE interfaces attached in a failover mode to my...
Hi Experts, I want to add a disk shelf to our exisiting NBU appliance setup, Can help me with any documentation or any old post with images. Thanks, Nayab
I just added in a new 5230 media server to replace an old 5200 and im having trouble figuring out how to migrate the two tape libraries over to it. Does any one know of a way to change the ownership of the robots so that the 5230 has control? Im no...
Hello All, I am trying to do a Push install for Linux clients in my netbackup environment. Problem is , they are blocked on all regular ports of scp\ssh\rsh\ftp. I am doing this with install_client_files command this is the output. Same in...
Hi All, as we have requirement to attach Tape drive lto 6 of hp model “HPLTO-6-ULKTRIUM 6250 SAS EXTERNAL TAPE DRVIE ” with netbackup appliance 5220 interface 6Gb/s Dual Port SAS interface It can be attached and used with appliance 522...
Im trying to add in a new 5230 appliance as a media server to my 7.6.0.3 environment and im stuck at figuring out what type of storage pool to choose. i already have a 5200 in place that i have been using for almost 5 years and it setup as puredisk ...
I used to be able to create an install file (well a tar file) from the Admin console in NBU 6.5 for each varitey of UNIX clients we have. The enviroment was upgraded to 7.6 with an appliance and I can't seem to figure out how to create the tar files ...
Hi all here's my problem. I need to know steps "how to do". till Nov 15th master NBU 7.5, win 2003 OS. master plays role of master+media server, name MMBK01 which is robot control host for IBM tape libraries tld 0 n tld 1. i got 1 nbu appliance N...
Hi, We have a problem with a new 5230 appliance that we are installing. When the IPMI is configured with a proper gateway we are able to connect to it, but when it has a gateway of itself configured it responds to ping and can open it in browser. ...