Topics with Label: Managing Backup Devices

Public Article on NetBackup Appliance Maintenance Releases

Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781

NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available

NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...

Late Breaking News and Important Updates about NetBackup Appliances Page

Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...

Resolved! Reset Storage Pool N5000

Hi, i've had to delete my storage server + disk pool from my Netbackup Master Server (7.1.0.3) because the disk media ID of N5000 (firmware 1.4.1) has been changed and wasn't available anymore. now, i've managed to forcely delete storage server + dis...

Steps to Build a Media Server?

I am looking for input and validation of the steps for building a media server. I am working on a project to highlight the operating expense (OpEx) savings of the NetBackup 5220 Backup Application. Espeically interested in the amount of time it take...

Resolved! Appliances With Distinct Replication Networks For AIR

Hi All Has anyone had experience with 5220 and 5020 Appliances where backups were performed via a backup VLAN and AIR Replication was performed via another network. Just looking for configuration examples, tips and tricks to set it all up as it shoul...

Resolved! Netbackup Appliances - Data Flow and Storage Sharing

I have a question regarding the data flow when using te 5220 Appliances, and the 'sharing' of the 5220 storage. I have a specific requirement whereby I am considering using a 5220 appliance as a Media Server with the majority of the disk configured a...

How do I change the IP address on a 5020 appliance?

I have a 5020 appliance that is a member of a storage pool. It is not the SPA. I need to change the IP address on eth3 to enable 10GB connectivity but there is no sysadmin account on a pool member. Does anyone know how to either: 1) run the sysadmin ...

Resolved! 5220 Appliance Topology - Help

Hi. Need help with appliance configuration. 1 NBU Domain, 1 NBU Master 7.1 (Datacentre 1) Datacentre 1 1 x physical Master 3 x 32Tb 5220 Load balanced MSDP of all appliances. Duplication target for Datacentre 2 and remote sites. Manag...

Running seedutil when only PureDisk/De-Dup disks are 5220's

I've got a 7.1.0.4 NetBackup Master (Win2k8 x64) that controls two 5220's, one of which is at a remote location with a very thin pipe. The remote 5220 is the primary backup location (for the remote office) and the the 5220 that is local to the Maste...

Upgrading to 7.5

Has anyone upgraded to 7.5 with a 5200 appliance running version 2.0.2? I've heard that an update to the appliances will be released in May to match up with 7.5 so i justed wanted to see if anyone is already running it or if its a better idea to w...

Resolved! node failure in puredisk pool

Assume: I have 6 nodes netbackup 5020 and grouping it into single pool. Question: If one node is failed, is data still accessable or not? I assume there are three cases when run into this kind of situtation. a) Service stop b) It doesn't impact the...

Resolved! duplications from wrong media server

I have two 5200 appliances (2.0.1) one is in our primary data center and one is at our DR site connected by a 43mb pipe. My primary appliance has two LTO tape libraries directly attached via fiber that are used for doing monthly backups. I am using...

NBU5000 filling up

I have a small concern. I was thrown into is situation where I am the sole support for our backup environment and I am not too sure about the dedupe solution. We have an NBU5000 with 32TB of storage. We originally had a problem in that it appeared no...

Re-assigning NBU5000

We had two NBU5000s tied together. They were going to be part of our DR and were configured to be in one location. Well, things changed and the units were packed up and shipped elsewhere. We are now trying to set up the units, new name, new ip etc an...

Stop restores from second appliance

I currently have two 5200 appliances in our datacenter. Backups run to appliance 1 first and then duplicated to appliance 2. Appliance 2 is set to be taken to our dr site in a few weeks. My issue is that i have noticed when I do a file restore som...

Netbackup Puredisk

Question: Can the Netbackup appliance 5020 be shared across multiple Netbackup domains/

Disaster Recovery Site?

I am working on creating a DR Site for our NBU 7.01 environment and have a few questions. My production environment has one Master server and two media servers. Daily backups are wrotten to to disk in the primary datacenter and relicated to the DR ...

Netbackup 7 - N5000 Appliance and PureDisk Client

A client of mine has bought the following; 72TB Symc Netbackup Platform Base 7.0 Xplat 1 Front End Tbyte Std Lic Rewards Band E 72TB Symc Netbackup Platform Deduplication option add-on 7.0 xplat 1 front end tbyte std lic ...

Resolved! NetBackup 7 and PDDO

Hi guys, Just looking for clarification that I have understood this correctly: I have a Netbackup 5000 appliance that I want to use as a disk pool in my current Netbackup 7 environment. I have read through the NBU PureDisk Deduplication Option Gui...

Resolved! Optimized Duplication?

Just wondering if anyone knows if the 5200 provides duplication of the deduped data between other 5200's (a.k.a. optimized duplication).

VOX

Discussion Posts