cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

NetBackup Appliance 2.7.3 reimage ISO download

The 2.7.3 upgrade rpm has been available for download for a little over a week now. Anyone managed to get the 2.7.3 reimage ISO "NetBackup_Appliance_2.7.3_ML.iso" from Symantec FileConnect yet? Or are you supposed to get them from elsewhere now? I...

RLeon by Moderator
   VIP   
  • 3894 Views
  • 6 replies
  • 0 kudos

Netbackup appliance Expansion unit not detected

We have just insatalled a 100 TB 5230 appliance and we are facing a severe  issue.   our appliacne is showing only the base unit storage . no expension unit storage is visisble we have 3 expansion unit our appliance version is 2.7.2 we have powe...

Is there a way to monitor the health of the 5230 appliance?

in NetBackup 52xx and 5330 Appliance SNMP Trap Reference Guide - 2.7.1 Appendix A "Note: Although the MIB file includes software traps, they are not used. NetBackup Appliance does not currently send any software traps." Since the 52xx appliances do...

effiko by Level 4
Partner Certified
  • 1589 Views
  • 2 replies
  • 1 kudos

Monitor tapes I/O in NB Appliance

Hi,   Is there any way to get some I/O statistics of the FC tapes connected to a NB appliance.  Networker can monitor the tapes I/O during the backups, but I could not find any solution in NB Appliance. It does not show any FC tapes in iostat etc...

ilap by Level 3
  • 580 Views
  • 4 replies
  • 0 kudos

Spurious Alerts following Appliance Upgrade to 2.7.2

I have recently upgraded a number of 5230 Appliances to 2.7.2, and whilst all appear to be functioning as expected we are getting numerous alerts relating to disk failures which are 'false'. I am wondering whether there is a BIOS issue here (mismatc...

SYMAJ by Level 6
Partner Accredited
  • 1411 Views
  • 4 replies
  • 1 kudos

Replication from second copy

Hi guys, My enviroment has 6 5230 appliance, appliance 1 and appliance 2 are working for backups, appliance 3 and appliance 4 are woriking for replications only, and appliance 5 and appliance 6 are replications targets.   I create a SLP like this,...

AndresV by Level 6
Partner
  • 430 Views
  • 2 replies
  • 0 kudos

Resolved! 5230 - Cannot Start NBFSD following 2.7.2 upgrade

I have a number of 5230 appliances, each configured as Master / Media servers accross a number of sites. I have just upgraded each of the appliances to 2.7.2, and all appears well excepting the Exchange GRT backups.  I haven't upgraded any clients a...

SYMAJ by Level 6
Partner Accredited
  • 2315 Views
  • 2 replies
  • 0 kudos

Housekeeping track logs from Accelerator NDMP backups

I have been building a new NetBackup implementation to backup an NetApp Filer which uses a 5230 appliance as the Master Server and two large Windows based Media Servers. The appliance was shipped in Dec 2015 and I have upgraded it to v2.7.1 specifica...

Dawsie by Level 3
Partner Accredited
  • 634 Views
  • 1 replies
  • 0 kudos

Resolved! Adding NTP server to Date/time page

Hi    Our appliance 5230, @2.6.0.3 in media server role is running fine. I checked its callhome service is not running, as NTP server entry is not added to it like our other appliance. My query is if I add NTP server to its configuration from web...

NBU35 by Level 6
  • 1129 Views
  • 2 replies
  • 1 kudos

Resolved! User Access Management on Appliances

Hi all, Am I reading it right that User Access Management, because it's part of the NBAC, isn't available on the NetBackup Appliances? Does this mean either I can give users admin access or nothing at all? I am aware of the command line ability to ...

R_M_H by Level 3
Partner Accredited
  • 798 Views
  • 4 replies
  • 1 kudos

Resolved! Routing on Appliance 5230

Hi  We are trying to add a route to our existing appliance 5230, running at 2.6.0.3. This is configured in media server role. Currently this server is getting used for backup of only one client which contains Netezza DB. Now we want to use this ap...

NBU35 by Level 6
  • 2963 Views
  • 4 replies
  • 0 kudos

Resolved! Advanced disk space

I´m running out space in my "advanced disk" but in my MSDP I have plenty of space. So I need to know if there is way to "take" some space from MSDP in order to add some TBs to advanced disk? If so, this process involves lose data from MSDP? For ful...

AndresV by Level 6
Partner
  • 438 Views
  • 1 replies
  • 0 kudos

Resolved! NetBackup Appliance 5230 as Master Server

Hello there!! Does anybody know if I can upgrade a NetBackup Appliance 5230 configured as master server from 2.6.1 to 2.7.1? Or if I can have a NetBackup Appliance 5230 configured as master server with version 2.7.1? I try to find the information i...

Di_Ro by Level 4
Partner Accredited
  • 1887 Views
  • 3 replies
  • 1 kudos

Resolved! Email notifications on backups from Netbackup 5230

I've tried to setup email notifications on backup competions on the clients.  I set it up in the admin console under the universal settings to come from the Server send mail and the Client send mail.  I read an article that said to use blat to send t...

Resolved! Netbackup appliance 5230 & Fibre Channel Autonegotiation

HI, I have deployed a 5230 appliance with 2.6.1.2 release. During the configuration of FibreTransport media server, I had several issues with the link between SAN Switch (Brocade 16Gb FABOS 7.3.0c ) and  the target ports on the appliance (port 1 on ...

f_buirey by Level 3
Partner Accredited
  • 1803 Views
  • 3 replies
  • 0 kudos
Labels