cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

NetBackup Appliance 5220

Hello All, I need to know what are the required Licenses of Netbackup, using Netbackup Appliance 5220 to support below. - Backup 10 TB. - Enable encryption. - Enable De duplication. - Backup Via SAN. - Three years support. Is it the same or there is ...

Resolved! VMware Datastore Zoning with Appliances

Very strange question came to me today. Datastore zoning must be done directly to Appliance or it should be via ESX!!! Also how to identify slot and port # from back side panel of appliance

V4 by Level 6
Partner Accredited
  • 2649 Views
  • 9 replies
  • 2 kudos

5220 PureDisk Volume Down

Hi, I have 2x5220 Master / Media appliances running 2.5.1 with external storage units, the PureDisk Volume is going down on one or other of the appliances every few weeks, it usually takes multiple reboots / full shudown to get it back up but it's hi...

DecKy by Level 4
  • 1276 Views
  • 11 replies
  • 1 kudos

Resolved! Relocating a 'live' 5220 Appliance

I have a site with 3 x 5220's - 2 local and 1 remote.  Optimised replication is taking place between the local and remote 5220's. Initially we placed the remote 5220 on the primary site, to allow for 'seeding' of the initial backups to the 'remote' 5...

SYMAJ by Level 6
Partner Accredited
  • 582 Views
  • 5 replies
  • 0 kudos

NetBackup 5200/5220 Appliances 2.5.2 is now available!

(crossposted from the Netting Out NetBackup blog) I'm very pleased to announce that the next Release Update for NetBackup 52x0 Appliances is now available! NetBackup 5200/5220 Appliances 2.5.2 Release Update is the equivalent Appliance patch relea...

CRZ by Level 6
Employee Accredited Certified
  • 609 Views
  • 7 replies
  • 0 kudos

Resolved! Configure IOIO eth port

Doesn anyone know how to configure the IOIO port on the 5200.  Is it just a standard ethernet port that provides console access?  In the network settings nothing shows as a configurable console port.

Stanleyj by Level 6
  • 2102 Views
  • 10 replies
  • 1 kudos

NetBackup 5220 appliance question

Hi everyone. Just wanted to ask if anyone has more information on host bus adapter support for the NetBackup 5220 appliance. Specifically, I'm validating if the appliance supports this: QLogic 8GB PCI-E quad port fibre channel HBA In the "Symantec Ne...

jgarcia1 by Not applicable
  • 361 Views
  • 3 replies
  • 0 kudos
Labels