cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

How to configure flashbackup-windows policy

How to configure flashbackup-windows policy ? Master/Media : NBU Appliance version 2.7.1 NBU Client Agent : 7.7.1 Policy Type : FlashBackup-Windows Backup Selection : \\. D:\ after I configure this and click OK but have error :Snapshot could not...

Exchange backup takes too much time

Hi guys, I have a question... My DAG enviroment is composed by three servers every node is a virtual server (VMWARE), but disks where databases (29 databases = 800 GB) are on LUMs. Netbackup enviroment: Master server is Windows 2012 and media serv...

AndresV by Level 6
Partner
  • 903 Views
  • 5 replies
  • 0 kudos

Resolved! Unable to restore a oracle control file in RHEL

Hi Guys,   Its me again :(   I´m trying to restore a oracle database according to this technote HOWTO63971 but when I run this command: run { allocate channel c1 type 'sbt_tape'; send 'NB_ORA_SERV=nbu_master, NB_ORA_CLIENT=ora_clnt'; restore ...

AndresV by Level 6
Partner
  • 964 Views
  • 2 replies
  • 0 kudos

Resolved! please provide link for dowbnload veritas software

Hi,   I want to download software veritas netbackup appliance new version. in the past download via Symantec file connect and now i don't saw new version of netbackup appliance software. I want to know new www for download veritas software.   t...

Resolved! how to configure nbu appliance catalog backup

Hi,   1. I would like to know how to configure nbu appliance catalog backup.  specify path for keep catalog?  2.  and incase of catalog backup between site?      HQ > master server is windows and branch master server is nbu appliance. how to con...

Resolved! Re-Image Netbackup Appliance 5230

Hi All ,   I have Netbackup Appliance 5230 , i need to recover it by using USB but the original usb that came with the appliance is missing  also the raid of server has been rebuild so there is no image currently running on . could you please Me...

Resolved! P2V Coversion fails with Status 7

Greetings, I  got involved with one P2V conversion issue which is segementation fault (core dumping) when executing through GUI and nbrestorevm command fails with P2V conversion job status 7. We have Appliances Based Master/Media Server running 2.6...

VPATIL by Level 3
Partner Accredited Certified
  • 587 Views
  • 2 replies
  • 0 kudos

Status 2060019 and status 87 Killing same job

Got following errors in our details on a solaris backup. Im on an appliance, 5220. We are running 7.6.1.1. Link to 2060019 in error message is a cyclical redirect. I saw in other posts that this was a problem in the pre 7.5.0.4 world, but was suppose...

Spud_2 by Level 3
  • 2179 Views
  • 4 replies
  • 0 kudos

Resolved! New N5230 v2.6.1.1 master/media auto creates an extra backup policy.

When configuring a new N5230 as a master/media in v2.6.1.1, the process auto-created a standard backup policy which has the following as "Backup selections" within this auto-created backup policy: /msdp/cat/databases/catalogshadow /msdp/cat/database...

sdo by Moderator
Partner    VIP    Certified
  • 1116 Views
  • 13 replies
  • 0 kudos

Resolved! Migrating tape libraries to new appliance?

I have to decommission my old 5200 which has been hosting two tape libraries used only for monthly tape jobs.  I'm moving the libraries to a new 5230 but was curouse what this means for the archived monthly tapes.  If i try and do a restore from one...

Resolved! Master Server cold stand-by on NetBackup Appliance

I need some advise please on the follow requirement guys; We bought two 5220 appliances from Symantec last year with an intention to use as active/stand-by Master servers by avoiding single point of failure for the NBU Master server. We call them Ap...

Itegral by Level 6
  • 686 Views
  • 7 replies
  • 0 kudos

Resolved! Appliance 5230 problem with Vm conversion vmware

Hi, i have a problem for restore a physical server with vm conversion. in my case my appliance is a master/media i have copied the vmtools iso into the /tmp to the appliance The gui ask me to choose the vmtools vmware when i brows my appliance, i...

fdassonville by Level 4
Partner Accredited
  • 830 Views
  • 16 replies
  • 0 kudos
Labels