cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Audit - Who changed what policies and when

We are running NBU Appliance based environment ver 2.6.1.1 and NBU ver. 7.6.1.1. We are required to enable auditing to capture who changed what policies and when. We also have OpsCenter Analytics that I am sure can possible be useful. Appreciate yo...

Itegral by Level 6
  • 1494 Views
  • 4 replies
  • 0 kudos

Dumping the list of backupids in an MSDP

Sometimes it's handy knowing what is currently living inside a dedup pool, such as when you're waiting to decom appliance prior to moving it to another domain. It can be a little difficult getting this information out of NetBackup though if your SLPs...

jnardello by Moderator
   VIP    Certified
  • 909 Views
  • 1 replies
  • 1 kudos

NetBackup Vault Reports

We upgraded our 5220 from 2.5.4 to 2.6.0.3 and we no longer get any Vault Reports.  NOT Enterprise Vault, just the normal vault that comes with NBU.  Anyone else run into this undocumented feature?  Vault still runs and it still ejects tapes, we just...

SLindo by Level 3
  • 644 Views
  • 4 replies
  • 0 kudos

Resolved! 5220 Rebasing

How often will Rebasing run on my 5220? is there a way to monitor other then crcontrol --rebasestate. I'm looking to see when it started and how far along it is in the process. Also can I be notified when it starts and stops? Maybe with opscenter? T...

PD001 by Level 5
  • 522 Views
  • 8 replies
  • 2 kudos

Actual amount of Data transferred using SLP & AIR

I'm trying to find an easy way to report on the actual amount of data being transferred from one Netbackup 5220 appliance to another 5220 appliance using SLP & AIR.  Both appliances are running 7.6.0.2.  I wrote a script to look for the  "CR sent" fi...

tsg13nm by Level 3
  • 634 Views
  • 5 replies
  • 0 kudos

OPS Centre Not connected with Pure DISK Appliance

Hello Team, We have Symantec pure disk  appliance (5220) as netbackup master server. Netbackup server is not geeting connected to the opscentre,  Could you please let me know what action needs to taken So that ops centre & netbackup server will be...

Vamsi1 by Level 5
  • 362 Views
  • 5 replies
  • 0 kudos

Resolved! Symantec 5230 Appliance - Disk Space Warning Message

I am receiveing an email alert (Warning) each morning relating to disk space utilisation on the de-dup pool in my 5230 Appliance (which is at 80%) and wish to raise the threshold for the warning to 85%.  The appliance is sitting steady at 80% so I am...

SYMAJ by Level 6
Partner Accredited
  • 1238 Views
  • 3 replies
  • 3 kudos

Resolved! NOM installation

Hi,   I have installed NOM server on NetBackup 6.5 environment, however it was not successful.   I am not getting NOM_BuitIn@hostname in the drop down list of doman, and i am unable to log in to NOM. I have installed NetBackup client-->ICS software--...

Resolved! NetBackup 5320 - Cron and Email???

A customer of mine has requested a report generated from the appliances which will provide specific pointed information regarding NetBackup images. The problem I am experiencing is when I add the entry to cron to run this command and pipe it to send ...

Jeff_Foglietta by Level 5
Partner Accredited Certified
  • 1180 Views
  • 5 replies
  • 1 kudos

IPV6 failed DNS lookups??

One of our admins was running some traces againts DNS and brought to my attention that the 5200 appliance that is in our DR facility is attempting to do IPV6 dns lookups.  IPV6 is not configured or used on anything in our environment so this confuses...

Resolved! New Reporting with 2.5.3?

Has anyone that upgraded to 2.5.3 started seeing some new monitoring reports on hardware? Ive started getting this report every 12 hours and Im not sure if this is something that is actually working or has been working all along and something happene...

Max Concurrent Job setting

I'm trying to find the optimal setting for my 5220's Max Concurrent Job setting for my diskpool, which is 2 shelf units with 72GB of space. Is there a way to monitor the box while making changes to this setting so I can tell if it is being over utili...

PD001 by Level 5
  • 304 Views
  • 1 replies
  • 0 kudos

Running DataCollect.sh fails with MegaRAID

Acting on instructions from support, I'm attempting to run /opt/NBUAppliance/scripts/DataCollect.sh   This fails with the following error:   ================================ERROR=============================================   MegaRAID_CLI Symlink doe...

OPscenter 7.5.0.4 and Failure Alerts

  I do not have analytics I need help as I have created individual backup policy alerts (per client and policy) that trigger on a backup completion and anything that is >0 to allow me to capture failures - and these would email to a mailbox where ano...

Labels