cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Veritas Appliance and SL3000

I have an NetBackup 5230 Appliance connected to a StorageTek SL3000 and I need to know the command to get tapes from the SL3000 CAP and store them in the Tape Library.

lewisra by Level 2
  • 509 Views
  • 3 replies
  • 0 kudos

Failed to expand/resize AdvanceDisk in 5330 appliance

Issue: Unable to expand advance disk on Veritas 5330 appliance   Steps Performed:                 >Added the Appliance Host entry in Master Server host file                 >FQDN and Short name of the Appliance was missing in the Master Server h...

Usman_Saeed by Level 4
Partner Accredited
  • 705 Views
  • 1 replies
  • 0 kudos

Zoning Aix to Netbackup 5230

Hi guys, I just create a zone between AIX (LPAR), 5230 appliance and a storage  like this   As you can the AIX server has two FC adapter each one belongs to a zone,but sometimes I lose visibility from netbackup so I have to go to the client and ru...

AndresV by Level 6
Partner
  • 373 Views
  • 1 replies
  • 0 kudos

How to zone Vmware Datastore LUN to Backup Host

Dear Experts Master Server : Windows Media Server ( acting as appliance 5230 as well) : Linux Storage : Hitachi HUS Array Vmware backup failing with status 23 ( policy set to use SAN transport mode). I have gone through few good articles  , but I...

AlBahr by Level 2
  • 1350 Views
  • 3 replies
  • 0 kudos

Spurious Alerts following Appliance Upgrade to 2.7.2

I have recently upgraded a number of 5230 Appliances to 2.7.2, and whilst all appear to be functioning as expected we are getting numerous alerts relating to disk failures which are 'false'. I am wondering whether there is a BIOS issue here (mismatc...

SYMAJ by Level 6
Partner Accredited
  • 1401 Views
  • 4 replies
  • 1 kudos

Resolved! Unable to restore a oracle control file in RHEL

Hi Guys,   Its me again :(   I´m trying to restore a oracle database according to this technote HOWTO63971 but when I run this command: run { allocate channel c1 type 'sbt_tape'; send 'NB_ORA_SERV=nbu_master, NB_ORA_CLIENT=ora_clnt'; restore ...

AndresV by Level 6
Partner
  • 964 Views
  • 2 replies
  • 0 kudos

Issues connecting to an appliance

Recently, I recieved an external drive from one of my remote sites with 5TB of data on it. I plugged it into one of my media servers and backed it up in NBU using msdp to another media/appliance server we will call it server 20. Now, I want to run a ...

Newbie777 by Not applicable
  • 504 Views
  • 2 replies
  • 0 kudos

Resolved! How to migrate backups between MSDP's

Hello people. I have a domain with two MSDP but a MSDP this with 89% in use and another 35% in use and I have backups with one-year retention. In this case, I wonder what is the best practice to migrate a backup between MSDP? I need to reduce a us...

rfmonteiro by Level 3
Partner Accredited
  • 615 Views
  • 3 replies
  • 0 kudos

Resolved! netbackup appliance connection with tape library

dear ali   i have netbackup appliance 5220 connected with fibra channel and lan ports   need to connect the tape library IBM TS3200 Tape Library with it   how to proceed with it  ,is there SAS port available on nbu appliance  please advice   ...

syedzeeshan by Level 5
Partner Accredited
  • 3247 Views
  • 7 replies
  • 0 kudos

Resolved! NetBackup Appliance hangs then shuts down

Hi troops, IHAC who found one of the two 5220 2.6.1.1 appliance turned off twice and he had to power it off from the display since IMPI was not responfing either. They opened a case with Symantec but since in the logs there was nothing relevant, Su...

Resolved! Appliance software Trap fail

Hi, Recently added and configured de SNMP Traps on the appliance and all hardware test were OK. The only problem is the software trap that i don't receive anything. I Stopped all process on Appliance and didn't appear any trap. I have Launched a Ba...

Arturo_Lopez by Level 5
Partner Accredited
  • 268 Views
  • 1 replies
  • 0 kudos

Resolved! Unable to download patches

Hi, We have a 5230 running 2.6.0.2 and are trying to install more recent patches on it. The first available patch is SYMC_NBAPP_update-2.6.0.3-1.x86_64.rpm. When we check the DownloadProgress, it says its stopped. Any ideas why this would be so? Th...

Fozzie by Level 1
Partner
  • 418 Views
  • 1 replies
  • 0 kudos

Resolved! NB7.6.0.3 restore to different location issue

Hi. Evnironment: MasterServer: Linux SLES11 RemoteConsoleServer: Windows 2008R2 (virtual machine) - is use for manage environment, backup polices, etc MediaServers & Storage: 2x NetBacakup Appliance 5230  NetBackup ver 7.6.0.3 is installd on all ...

Labels