cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

How to zone Vmware Datastore LUN to Backup Host

Dear Experts Master Server : Windows Media Server ( acting as appliance 5230 as well) : Linux Storage : Hitachi HUS Array Vmware backup failing with status 23 ( policy set to use SAN transport mode). I have gone through few good articles  , but I...

AlBahr by Level 2
  • 1346 Views
  • 3 replies
  • 0 kudos

How to check the Backup Throughput and Performace.

How to check the Backup Throughput and Performace. Master Server : OS - LINUX_RH_X86 NBU Version - 7.6.0.4 Media Server  OS - Linux 2.6.32.59-0.7-default-fsl NBU Appliance 5230 NBU Appliance Version is 2.6.0.4.   Current speed : 150 GB/Hour

Vickie by Level 6
  • 421 Views
  • 2 replies
  • 0 kudos

Exchange backup takes too much time

Hi guys, I have a question... My DAG enviroment is composed by three servers every node is a virtual server (VMWARE), but disks where databases (29 databases = 800 GB) are on LUMs. Netbackup enviroment: Master server is Windows 2012 and media serv...

AndresV by Level 6
Partner
  • 900 Views
  • 5 replies
  • 0 kudos

Resolved! P2V Coversion fails with Status 7

Greetings, I  got involved with one P2V conversion issue which is segementation fault (core dumping) when executing through GUI and nbrestorevm command fails with P2V conversion job status 7. We have Appliances Based Master/Media Server running 2.6...

VPATIL by Level 3
Partner Accredited Certified
  • 587 Views
  • 2 replies
  • 0 kudos

5230 SAN VMware backups - seeing too many LUNS

We mapped SAN LUNs to each appliance using single target and single initiator zoning, but for some reason the appliance is detecting over 300+ path/device/disk (/dev/sg313). We only have about 77 LUNs provisioned on our SAN, so the high counts must b...

Obi_Wan by Level 3
Employee Accredited
  • 275 Views
  • 2 replies
  • 0 kudos

Resolved! Appliance 5230 problem with Vm conversion vmware

Hi, i have a problem for restore a physical server with vm conversion. in my case my appliance is a master/media i have copied the vmtools iso into the /tmp to the appliance The gui ask me to choose the vmtools vmware when i brows my appliance, i...

fdassonville by Level 4
Partner Accredited
  • 830 Views
  • 16 replies
  • 0 kudos

Enable Web Services on Netbackup Appliance 5230

Hello, Recently got some new 5230 Appliances and am looking to deploy the VMware Plugin. Is it possible to enable the Web Services on Netbackup Appliances? I tried poking around the appliance and couldnt find a place where this could be done. Thank...

Resolved! VMware backup over SAN: Appliance to ESX zoning

Guys, I have a Solaris based Master server and 5 x 5220 Appliances (media). I am interested to configure VMware backup over SAN. I need confirmation on whether zoning between Appliance (media server) to ESX is required? If yes, then Appliace is Ini...

Itegral by Level 6
  • 1976 Views
  • 6 replies
  • 0 kudos

Resolved! "Orphaned" bpbkar processes on 5220 appliance?

Has anyone else run into this issue?  Over time, more and more bpbkar processes become "orphaned" on my appliance.  They are ALL VMware backup processes (I can tell by the hostnames in the bpbkar commands). It seems to correspond to a "Status 13" - ...

elanmbx by Level 6
  • 253 Views
  • 1 replies
  • 1 kudos

VmWare vSphere 5.1 Sicherung mit NetBackup 7.6.0.2

Hallo, Seit ich unsere komplette NetBackup Domäne auf 7.6.0.2 gehoben habe. habe ich bei manchen vmWare Guests (Servern) ein problem (5 Server von 120):   bei manchen Server ist ersichtlich: Konfigurationsprobleme:Die Festplatten der virtuellen M...

Configure DMP on appliance 5220 running on v2.6.0.2

Hi all, Did anyone manage to successfully configure the SAN multi-path to your SAN storage array through the DMP setup on the appliance 5220 v2.6.0.2? I have an existing case with support and still waiting for backline to assist. If anyone manages...

LiXiNg by Level 3
  • 383 Views
  • 3 replies
  • 0 kudos

Resolved! Appliance v2.5.2 to v2.6.0.1 failed -

Trying to upgrade a NB5220 v2.5.2 master server to v2.6.0.1 (which is actually in VMware Fusion 6 on a Mac) and I get this: Any ideas how to fudge is past this check ? Thanks.  D.

sdo by Level 6
Partner    VIP    Certified
  • 266 Views
  • 4 replies
  • 0 kudos

Resolved! NetBackup 7.6GA vSphere 5.5 EEB

I was wondering if anyone has installed the NetBackup 7.6GA vSphere 5.5 EEB to allow VMware backups of vSphere 5.5 environments.  If so, do you know if it supports vSphere 5.5 update 1?  

Labels