cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Netbackup Appliances 5230 with PureDisk: How many streams?

Hi all, We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 ) We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB Pure...

Backups on MSDP are slow (Slower than Tape)

Hi, I have an environment of Netbackup 7.5.0.4. The environment details are as: Master Server: IBM AIX 6.1, Netbackup 7.5.0.4 Media Server 1 (For AIX systems): IBM AIX 6.1, Netbackup 7.5.0.4 We have and MSDP pool on our media server of 20TB. The file...

Disk or tape to Deduplication Disk Pool

Hi Everyone, I am wondering if there is a way I can duplicate images that I have stored on either disk or tape to a Dedup Pool? Windows 2008 R2 Media and Master servers running Netbackup 7.5.0.5

rbkguy by Level 4
  • 505 Views
  • 3 replies
  • 0 kudos

MSDP question re full at 96% vs. high water mark at 98%

  When does full disk processing take place?  At 96% or 98% ? And doesn't this all imply that a high water mark is probably best set to something like 90% (max)or probably (85%) so that clenup can occur before it gets full.  If so, then why is teh de...

sdw305 by Level 3
  • 1419 Views
  • 1 replies
  • 0 kudos

How to change MSDP Path?

  Hi All, Master Server:nbu 7.5.0.5 I config MSDP path "c:\dedup", the disk does not  have enough space. so i want to change the path(c:\dedup)to "d:\dedup".  pls check Attachment.   TKS

Backing up clustered servers in PureDisk 6.6.1

Guys, i have purdisk 6.6.1 PureDisk enviornment which is backing up 20 remote sites across Asia. I have a requirement to backup the clustered servers now.. i know how it works in Netbackup; you installed agent on both active and passive node and tell...

Spartacus81 by Level 6
Partner Accredited
  • 291 Views
  • 4 replies
  • 0 kudos

deduplication pool size estimation.

hi all. Need an advice for the following. We have an Netbackup setup with some MSDP pools . We need to plan our deduplication pool sizes according with our disaster backup/restore scheme we have. So at buiding a we have the "pud1"  server at building...

grlazy by Level 3
  • 320 Views
  • 1 replies
  • 0 kudos

Puredisk dancing

We need to switch our backup SAN from Pillar (SAN01) to EMC (SAN02).   I was wondering if we could de-assign a LUN from a SAN (just said SAN01) on media server (just said media01). And then assign a new LUN from another SAN (just said SAN02) on the m...

Check Size of a Image

Is there any way to check the size of an image in an MSDP? I need to replicate a subset of the images on one MSDP to another and am trying to put a timeline together. Also if there is a way to figure out the size of that image after it is rehydrated ...

Resolved! MSDP Always busy

I am trying to do some upgrades to the firmware and drivers on a server containing a MSDP. Being new to NetBackup I recently took a different pool down, most likely related to shuting the server down while the pool was still processing. After going t...

PD SPA Replicated data showing markedly different reduction factor

Hi all. We have a NetBackup 7.0.1 Master Server controlling SLP driven backups to 2 Puredisk 6.6.1 SPAs. The curious thing is that: on the SPA where the primary images are housed, a data mining report shows that about 30Tb of images are being protect...

Kev_D by Level 3
Partner Accredited Certified
  • 165 Views
  • 1 replies
  • 0 kudos

Puredisk compaction

We have two Puredisk SPA's each with seven content routers addressing a total of 138TB per SPA. We only use Puredisk for Netbackup PDDO backups. Does anyone else find that when compaction runs on the content routers that backup throughput drops consi...

gc_bus by Level 4
  • 197 Views
  • 3 replies
  • 0 kudos

PureDisk deduplication failure

Hi, Getting the following for the same 5 deduplication jobs, other deduplication jobs are successfully completing. 21/04/2011 06:25:57 - requesting resource LCM_GBLVBAK0-hcart2 21/04/2011 06:25:57 - Info nbrb(pid=4148) Limit has been reached for the...

_11 by Level 2
  • 232 Views
  • 2 replies
  • 0 kudos

netbackup puredisk duplication issues - media open error (83)

Hi there, We are having major issues with duplication.  I have 2 media servers and 1 management server, all was working fine until i changed one of the media server IPs. now i cant get a single duplication job to run (all backups and restores run fin...

jwothers by Not applicable
  • 544 Views
  • 1 replies
  • 0 kudos