As part of troubleshooting in pure disk environment for systems state failures.
how to check that for windows 2003/2008 R1 or R2 clients have latest VSShotfix or how to check the server require latest vsshot fix.
Please let me know
Master Server ( nbu01 )
NetBackup Master 184.108.40.206
Media Server ( nbu02 )
NetBackup Media 220.127.116.11
MSDP with puredisk
Setup storage server load balancing for dedupe pool
nbu01 and nbu02
setup SLP backup to disk then d...
Hoffentlich kann mir jemand von Euch helfen :)
Über "Configure Disk Storage Server" wurde auf einem Media Server ein MSDP Storage Server eingerichtet.
Danach wollte ich über "Configure Disk Pool" einen PureDisk Diskpool anlegen.
Dabei habe d...
Perform the following action in a puredisk cluster:
Freeze the clusterTake down puredisk for maintenance
At this point, the cluster will set the state of puredisk to "offline"
Bring puredisk back up
At this point, the cluster will NOT set the state o...
I have a Storage Pool PureDisk 6.6.3a with 6 nodes :
- Node 1 / SPA, MBS, MBE and CR
- Node 2 / MBE and CR
- Node 3 / MBE and CR
- Node 4 / MBE and CR
- Node 5 / MBE and CR
- Node 6 / MBE and CR
This Storage Pool work ...
I have environment like this, and need best solution for this scenario.
Puredisk Server has external disk (i have already use 6 slot from 12 slot). Totally existing 2 TB diskpoll for PD server.
And now /Storage status is Full. We need increas...
We have set replication between 2 PureDisk SPA (18.104.22.168) for several agent and all is working fine except for one agent. We have the same error each time for him and backups are fine :
*** Start: Replication Prepare ***
The is Classic Repli...
I've configured replication between 2 SPA's (22.214.171.124) and each time, jobs are stopped with the following error in job details :
Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 2048 bytes) in /opt/pdmbe/mgmtc...
In PureDisk 6.5 the max storage space that a content router can address is 8TB, so if you need more backup space you add another content router.
If PureDisk is set up in a VCS cluster, I understand that you just add another node to act a...
I'm trying to re-install from scratch "PureDisk in High Availability" (Clustered mode).
I get benefit of this Maintenance plan to add new volumetry (new LUNS).
Currently, all my nodes have PDOS (126.96.36.1998) well installed.
But I get an issue: ...
We are trying to use HP NC 522SFP 10GBE server adapter on Puredisk 6.6.03 servers, to use them for data transfers between the MAS/MED and Puredisk servers. While the MAS/MED are on Win2008 and managed to get the cards working, the Puredisk servers ar...
We are considering Netbackup Puredisk for our environment - we have 10 remote offices, out of which 5 have central file servers and the remaining 5 are desktop and laptop users without any central sotrage locations.
One additional office (central...
I use NBU in conjunction with PureDisk, I mean I use PDDO
I recently added a node in my PureDisk Storage Pool. This node is Content Router and MetaBase Engine
The new node add been successfully added to the Storage Pool.
Bur the PDDO diskpool s...
Iam using PDOS 6.6. We have 3 Servers ( one for /Storage, MBE) and the other two for CR.
When Iam trying to add the disk group using the GUI. Iam not able to do this. I want to try this from commandline.
Can any one help me please.....