cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Client - Media - PureDisk Linux network traffic

Hello everyone.   We have a backup solution and I am trying to find a bottleneck. Configuration is as follows: Veritas SFHA clustered Master server running NBU 7.5.0.6 on RHEL6.1.  Number of Media servers. And 3 pairs of PureDisk 6.5.5 pools as...

Resolved! Unable to change SMTP setting in Puredisk 6.6.5

According to p220 in the "Symantec NetBackup PureDisk™ Backup Operator Guide Release 6.6.4" and my own experiance (on other SPA's). The SMTP setting for event/policy escalations is set in the Gui at Settings>Configuration>Configuration File Templates...

M-NYC by Level 3
  • 2590 Views
  • 1 replies
  • 0 kudos

Resolved! Puredisk vs AdvancedDisk

Hello, wath'is the difference between Puredisk and AdvancedDisk? Now I use only Puredisk, but for space problem I will use free AdvancedDisk for same VM but I dont understand the difference. Thank's to all Luca      

How to properly retire PureDisk servers

It was a long journey but time has come... Is there any special way neccessary to remove PureDisk server that was replicating to another one (both data and SPA) or just deactivate the relevant PureDisk agents under Agent management?

f25 by Level 4
  • 1820 Views
  • 1 replies
  • 0 kudos

Reset PureDisk Web Console Login

Here's my situation: My company purchased another company at the end of last year.  We inherited 2 PureDisk servers that are running PDLinux on Dell hardware.  We need to get to the data on these servers so we can back it up and then decom the boxes...

NBU PURE DISK wizard

Hi All. I am creating the pure disk deduplication pool.   When i run the  Storage server wizard, I select pure disk deduplication pool. Next and then i select the pur disk server. Next.but after that no volume name comes up on the console. This...

Arun_K by Level 6
  • 661 Views
  • 1 replies
  • 0 kudos

Store the Contents on the Content Routers

Hello, Could you please help us to resolve below issue. Store the Contents on the Content Routers : tx: could not be stored (Error while processing \\?\D:\Groups\CRED_PORTFOLIO_IS_09919\CCM\cpis\SOx Production\2014 Projects\CPIS Presentation\SOx P...

Spool and Spad are not starting -2106

Hello,   I'm seeing one of my disk down going under the follow error in the OS (linux):  ./spad --trace Error: 25002: BadValue : (none) File     : /etc/pdregistry.cfg Section  : Symantec/PureDisk/ContentRouter Entry    : ConfigFilePath Reaso...

Luiz_Prina by Level 4
Employee
  • 1421 Views
  • 0 replies
  • 0 kudos

Resolved! agent.cfg and pd.conf

Geeks !   I am very mucg confused about the functioning and usage of agent.cfg and pdf.conf file. Which one should i use to limit the bandwidth.   I gotta limit the bandwidth for duplication to 5MB/sec.   How should i proceed ?   Thanks, Pr...

PranavB by Level 4
  • 1993 Views
  • 2 replies
  • 1 kudos

PureDisk Login Error

Hi, We are not able to login to PureDisk. We get the following error message at the login screen   ; nested exception is: javax.net.ssl.SSLException: vrts.vss.sdk.at.exception.VRTSAtException: Operation Failed    This w...

AnyKey by Not applicable
  • 1395 Views
  • 0 replies
  • 0 kudos

BusyBox Images

Hi Team,   I need to customise the Netbackup BMR recovery environment for the  project, so that a specific VLAN can be used. Does anyone know how to customise and recompile Busybox images please?    

2 Data Removal Policies for one Data Selection

I manage several remote PureDisk SPAs and noticed one had 2 Data Removal Policies with the same data selected. One removal policy is set to 45 days and the other is set to 15 days. my question is: Does one take priority over the other or will the 15 ...

Rayman by Not applicable
  • 651 Views
  • 1 replies
  • 0 kudos

PureDisk Agent Config File Update is stalled

Hi, I am troubleshooting SPAR replication issue on 6.6.3 PureDisk. On the Destination Storage Pool SPAR jobs start and keep being queued with 0% progress until 24h watchdog kills them. On the Source Storage Pool the SPAR job is killed by watchdog aft...

f25 by Level 4
  • 788 Views
  • 2 replies
  • 1 kudos

How to determine if CR rebasing completed

Hi, I am trying to find a way to find out if the post 6.6.3a PureDisk upgrade Content Router rebasing has completed. It is quite easy to check with the crcontrol if the rebasing option is enabled or disabled at all but I would like to know if the reb...

f25 by Level 4
  • 1249 Views
  • 4 replies
  • 1 kudos